Volkswagen Golf / Golf GTI / Jetta. Manual — part 1239
Warnings regarding use of product.
RAPGARD adhesive residue remains on paint finish,
remove with a non-abrasive polishing product such as light
colors or dark colors.
Thick lines of adhesive residue can be removed with
general purpose adhesive cleaner or equivalent.
Note:
Paint discoloration (looks like shaded or dark magic marker
lines) can be removed with a heat gun using following
procedure:
- Hold heat gun approximately 3 in. away from affected
paint surfaces and apply heat using slow oscillating
motions until discoloration is gone.
- If discoloration remains, wipe heated area with Isopropyl
alcohol and repeat procedure to increase surface drying.
Important!
After inspecting and removing RAPGARD, washing vehicle,
inspecting and repairing any defects in paint surfaces,
moldings and glass:
- Protect vehicle paint surface by applying 3M Perfect-It
Paste Wax or equivalent.
RAPGARD Disposal
RAPGARD can be disposed as normal paper waste. If
unsure about proper disposal procedures in your area,
check local regulations.
Perform test drive
To what extent the following can be checked is dependent
upon the vehicle equipment and local conditions
(urban/country).
The following should be checked by means of a road test:
- Engine: Output, misfiring, idling speed, acceleration
- Clutch: Pulling away, pedal pressure, odors
- Gear selection: Ease of operation, shift lever position
- Automatic transmission: Selector lever position, shiftlock /
ignition key interlock, shift behavior, display in instrument
Description of work (part 2 of 2)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст