Volkswagen Golf / Golf GTI / Jetta. Manual — part 289
34-67
Assembly
sequence
Disassembling
and assembling
transmission
housing,
selector
mechanism,
input shaft,
output shafts,
differential and
selector rods
Special tools
and equipment
VW 309
Holding plate
VW 313
Support
clamp
VW 353
Transmission
support
30-21 Sleeve
T40008
Press piece
V.A.G 1331
Torque
wrench
Transmission, disassembling and assembling
34-68
Disassembling
Vehicles with 6-Cyl. engines
Vehicles with 4-Cyl. engines
- Secure transmission to assembly
support with bolts (arrows).
- Secure transmission to assembly
support with bolts (arrows).
Transmission, disassembling and assembling
34-69
- Turn transmission on assembly support with oil
drain plug downward.
- Place drip tray underneath.
- Drain transmission oil.
- Remove slave cylinder with release bearing
(arrows).
- Place selector shaft in neutral position.
Transmission, disassembling and assembling
34-70
- Remove back-up light switch -1-.
- Remove hex bolts -2- for selector
shaft cover plate -A-.
- Carefully pull out cover plate.
- Remove locking bolt -3- for
selector shaft gate.
- Remove bolts -4- and press
selector shaft cover -B- out of
transmission housing.
- Pull selector shaft out of
transmission housing.
- Remove both flanged shafts.
- Remove bolts securing
transmission housing to clutch
housing -A- in area of differential.
Transmission, disassembling and assembling
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст