Volkswagen Golf / Golf GTI / Jetta. Manual — part 1019
nitrogen
reducer for nitrogen (max. reducing pressure:
15 bar)
Quick-release coupling adapter for service
connections, 2x included in scope of delivery
of service station
00-9, Quick-release coupling adapter for
service connections
Open-ring wrench, size according to bolted
joints at refrigerant pipes
Not illustrated
Valve opener for charging hoses
Not illustrated
Connecting nipple for conical seal 5/8"-18
UNF
Not illustrated
Compressed-air gun with rubber end piece
Not illustrated
Valve opener for Schrader valve
Not illustrated
Hand shut-off valve 5/8"-18 UNF
Not illustrated
Recycling container for refrigerant R134a
Not illustrated
Digital thermometer
Not illustrated
Protective gloves not illustrated
Not illustrated
Protective glasses
Not illustrated
Refrigerant R134a with cylinder (capacity as
required)
Not illustrated
Nitrogen with compressed gas cylinder
Not illustrated
Band wrench (oil filter) as counterhold for
ribbed belt pulley
Not illustrated
Improvised tools
Overview
page
Charging hose with connection for
workshop compressed-air system
00-9, Charging hose with connection for
workshop compressed-air system
Tools and materials
available from regional sales
center or importer
A/C service station VAS 6007A
(and other or currently available
service stations)
Testing equipment and tools
13/2/2005
Catalog workshop equipment
- The operations "testing,
extraction (recycling), evacuation
and charging" are to be performed
in line with the relevant operating
instructions.
- The filters and dryers installed
are to be replaced at the latest at
the end of the period of use
specified in the operating
instructions and whenever the
station has been drained (keep
replacement filter to hand;
available from equipment
manufacturer, refer to operating
instructions).
- Use can also be made of service
stations not described here.
Catalog workshop equipment
Note:
- This service station comprises
the following standard
components: Charging cylinder,
pressure gauge set, vacuum
pump, shutoff valves and charging
hoses.
- One quick-release coupling each
(for service connections on high
and low-pressure side) is included
in the scope of delivery of this
service station.
Leak detector
V.A.G 1796
Testing equipment and tools
13/2/2005
Leak detection system VAS 6196
Disengaging tool V.A.G
1795+1795/1
Retainer V.A.G 1616 for clutch
plate (for "Sanden" compressors)
Puller V.A.G 1616/1 (for "Sanden"
compressors)
A/C clutch set
V.A.G 1719 (for
"Zexel" compressors)
Adapter set V.A.G 1785
Testing equipment and tools
13/2/2005
- Adapter for flushing with
compressed air and nitrogen
A - 5/8"-18 UNF thread for conical
seal
B - Union nut (for connection with
O-ring) with thread
- M 18x1.5 V.A.G 1785/1
- M 20x1.5 V.A.G 1785/2
- M 24x1.5 V.A.G 1785/3
- M 28x1.5 V.A.G 1785/4
A - 5/8"-18 UNF thread for conical
seal
B - Threaded connection for O-
ring
- M 18x1.5 V.A.G 1785/5
- M 20x1.5 V.A.G 1785/6
- M 24x1.5 V.A.G 1785/7
- M 28x1.5 V.A.G 1785/8
Valve adapter
A - 5/8"-18 UNF thread for conical
seal
B - Internal thread with valve
opener M 10x1.25 V.A.G 1785/9
(for connections with valve on
high-pressure side) M 12x1.5
V.A.G 1785/10 (for connections on
low-pressure side)
Note:
- A Schrader valve is screwed into
connection - A - .
- A valve opener must be installed
in the charging hose connection.
Testing equipment and tools
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст