Volkswagen Golf / Golf GTI / Jetta. Manual — part 530
- Install triple roller star onto shaft and press onto stop.
- Make sure that the pressure does not exceed 3.0 t!
- If necessary coat axle shaft splines and triple-roller star
with lubricating paste G 052142A2 .
- Insert circlip, make sure seated correctly.
- Press 70 grams of joint grease from repair kit, into triple
roller joint.
- Slide joint over rollers and hold.
- Press 60 grams of joint grease, from repair kit, into
reverse side of triple roller joint.
- Install joint protective boot.
- Install clamp.
Note:
n
For a better alignment of the multi -point socket head
Front drive axle, servicing
bolts when mounting the axle shaft, it is necessary
that the clamping ear of the clamp - arrow A - is
placed between the fixing flanges from the joint -
arrowB - .
- Tighten clamp with hose clamp pliers V.A.G1275 .
- Tighten clamp with hose clamp pliers V.A.G1275 .
Front drive axle, servicing
42 - 1
Evaluation of accident vehicles
A check list for evaluating the suspension of accident
vehicles can be found here
00-2, Check list for
evaluating the suspension of accident vehicles
.
Evaluation of accident vehicles
42 - 2
Rear axle, servicing
Rear axle, removing and installing
Special tools, testers and auxiliary items
required
n
Torque wrench V.A.G1332
n
Engine/transmission jack V.A.G
1383 A with universal transmission
mount V.A.G1359/2
n
Brake pedal depressor V.A.G1869/2
Special tools, testers and auxiliary items required
Rear axle, servicing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст