Volkswagen Golf / Golf GTI / Jetta. Manual — part 865
01-237
V.A.G 1551 display
Possible cause
Corrective action
01329
Convenience system
data BUS in emergency
mode
Faulty wiring or
connectors
Wiring OK., then:
Note: New DTC's are stored, these
must be erased
- Check wiring and connectors using
wiring diagram
- Disconnect all door main connectors
and reconnect one after the other
while observing measured value block
- Replace the control module that has
blocked the bus
- Read Measuring Value Block;
Display group number 011
Page
01-272
, display zone 4
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-238
V.A.G 1551 display
Possible cause
Corrective action
01330
Central control module for
convenience system -J393-
Malfunctioning
Central control
module for
convenience system
malfunctioning
- Replace
convenience system
central control module
Voltage supply
too high
Battery -A-
malfunctioning or
discharged
Voltage regulator -
C1- malfunctioning
Alternator -C-
malfunctioning
- Check wiring and
connectors using
wiring diagram
- Read Measuring
Value Block; Display
group number 006
Page 01-262
, display
zone 1
Voltage supply
too low
Battery -A-
malfunctioning or
discharged
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-239
V.A.G 1551 display
Possible cause
Corrective action
01331
Door control module driver's
side -J386-
Malfunctioning
Door control
module, driver's
side -J386-
malfunctioning
- Replace door control
module, driver's side -J386-
Faulty wiring or
connectors
- Check wiring and
connectors using wiring
diagram
No
communication
- The system, even with the
DTC entry, is OK.
- Erase DTC memory
- Perform functional check
- Using Read Measuring
Value Block; display group
number 012
Page 01-274
,
display zone 2, a check can
be made to see if the door
control module is installed or
not.
Voltage supply
too high
Battery -A-
malfunctioning or
discharged
Voltage regulator -
C1- malfunctioning
Alternator -C-
malfunctioning
- Check wiring and
connectors using wiring
diagram
- Read Measuring Value
Block; Display group number
006
Page 01-262
, display
zone 1
Voltage supply
too low
Battery -A-
malfunctioning or
discharged
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-240
V.A.G 1551 display
Possible cause
Corrective action
01332
Door control module, front
passenger's side -J387-
Malfunctioning
Door control
module,
passenger's side -
J387-
malfunctioning
- Replace door control
module, passenger's side
-J387-
Faulty wiring or
connectors
- Check wiring and
connectors using wiring
diagram
No
communication
- The system, even with
the DTC entry, is OK.
- Erase DTC memory
- Perform functional check
- Using Read Measuring
Value Block; display group
number 012
Page 01-
274
, display zone 2, a
check can be made to see
if the door control module
is installed or not.
Voltage supply
too high
Battery -A-
malfunctioning or
discharged
Voltage regulator -
C1- malfunctioning
Alternator -C-
malfunctioning
- Check wiring and
connectors using wiring
diagram
- Read Measuring Value
Block; Display group
number 006
Page 01-
262
, display zone 1
Voltage supply
too low
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст