Volkswagen Golf / Golf GTI / Jetta. Manual — part 1054
01-124
If the displayed kilometer reading in
instrument cluster is OK:
- Press -Q- button to confirm input.
Channel 9 Adaptation 8963
Q
Store changed value?
Indicated on display:
- Press -Q- button to confirm input.
Channel 9 Adaptation 8963
Changed value is stored
Indicated on display:
- End odometer adaptation by
pressing
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -6- to select
"End Output" function 06.
Rapid data transfer
Q
06 End Output
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
Help
Enter address word XX
Indicated on display:
The tester is now in basic function
again.
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
01-125
Distance impulse number (K number),
reading/confirming
Distance impulse number can only be
read/confirmed on VDO instrument clusters.
Notes:
The distance impulse number is a constant
used to calculate the speed indication and
distance travelled.
The distance impulse number (K number)
cannot be changed using the "Adaptation"
function. To change the distance impulse
number, a code that corresponds to the vehicle
engine/gearbox combination must be entered
using "Code Control Module" function 07.
Vehicles. 05.99 05.00
Page 01-95
,
vehicles 05.00
Page 01-99
.
For instrument clusters with mile indicators, the
distance impulse number is shown in
kilometers. The trip impulse number for mile
values can be calculated as follows:Trip
impulse number for kilometer values x 1.609 =
trip impulse number for mile values.
Press the -C- button on the VAG 1551 to abort
the "Read distance impulse number" function.
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
01-126
- Connect scan tool VAG 1551, select operating
mode 1 "Rapid data transfer", switch on ignition
and enter address word 17 "instrument cluster".
- Press -Q- button to confirm input.
- Press
button until "Select function"appears in
display.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -1- and -0- to select "Adaptation"
function 10.
Rapid data transfer
Q
10 - Adaptation
Indicated on display:
- Press -Q- button to confirm input.
Adaptation
Enter channel number XX
Indicated on display:
- Press buttons -1- and -6- to select adaptation
"channel 16".
- Press -Q- button to confirm input.
Channel 16 Adaptation 3538
<- 1 3 ->
Indicated on display (example only):
- Read/confirm distance impulse number in
accordance with production date and/or vehicle
engine/gearbox combinations
code
tables:vehicles 05.99 05.00
Page 01-95
,
vehicles 05.00
Page 01-99
.
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
01-127
- Interrupt "Reading distance impulse number"
with "C" button.
Adaptation
Enter channel number XX
Indicated on display:
- Press "C" button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
- Press buttons -0- and -6- to select "End Output"
function 06.
Rapid data transfer
Q
06 - End Output
Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
Help
Enter address word XX
Indicated on display:
The tester is now in basic function again.
Instrument cluster m.y. 2000 through m.y. 2001, On Board Diagnostic (OBD)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст