Volkswagen Golf / Golf GTI / Jetta. Manual — part 785
- Open locking mechanism - 2 - .
- Fold bracket - 1 - upward and remove warning triangle - 3
- .
- Remove bolts - arrows - .
- Slide bracket - 1 - upward and remove.
- Remove bolts - 1 - (Qty. 13).
Rear lid trim
13/2/2005
- Loosen trim - 2 - in area of grip recess
out of lid and remove.
Installing
- Check nuts - 3 - , replace if necessary
and insert into holes of lid.
- Place trim - 2 - in installation position
and bolt firmly.
- Insert bracket for warning triangle and
bolt firmly.
- Insert warning triangle into bracket.
- Fold bracket closed and bolt down
locking mechanism.
Trunk escape handle, removing and
Rear lid trim
13/2/2005
installing
Removing
- Unclip up clip - 6 - and release cable Bowden - arrow -
- Clamping washer - 1 -
n
Qty. 6
- Remove frame - 2 -
- Remove handle support - 4 - from rear lid trim.
- Release escape handle - 5 - from handle support - 4 - .
Installing
Install in reverse order of removal.
Tailgate trim, assembly overview (Golf
Rear lid trim
13/2/2005
wagon/Jetta wagon)
1. Lower trim panel
¡
Removing
70-5, Tailgate
trim, removing and installing
(Golf wagon/Jetta wagon)
2. Screws
¡
Qty. 2
3. Clips
¡
Qty. 10
4. Guide pin
¡
Qty. 2
Rear lid trim
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст