Volkswagen Golf / Golf GTI / Jetta. Manual — part 397

01-331

Infinity

The resistance is infinite, open circuit.

= Ohm

Forget-malfunction counter

When a fault gets in the memory fault

counter, after 50 vehicle starts, and this fault
is not repeated again, the memory counter
erases the fault.

Definitions

Select a topic

Vehicle data sticker

45 - Anti-lock brake system

Anti-lock brake system (ABS) and anti-lock brake system with
electronic differential lock (ABS/EDL) ITT Mark 20 IE

General

Distinguishing features of ABS ITT Mark 20 IE and the ABS/EDL ITT
Mark 20 IE

Notes for repair work on ABS, ABS/EDL

Hydraulic unit, brake booster/master cylinder, overview

Hydraulic unit/ABS control module, removing and installing

ABS system components for front axle, removing and installing

ABS system components on rear axle, removing and installing

Anti-lock brake system (ABS) Mark 60

General information on this ABS, ABS/EDL

Distinguishing features of ABS Mark 60

Notes for repair work on ABS, ABS/EDL

VAS 5051 Vehicle Diagnostic, Testing and Information System,
connecting and selecting functions

Electrical/electronic components and installing locations (ABS)
Mark 60

Hydraulic unit, brake booster/brake master cylinder Mark 60,
assembly overview

Control module and hydraulic unit Mark 60, removing and installing

DTCs displayed by (ABS) Mark 60 warning lights -K32-, -K47-, -
K118-, and -K155-

ABS system components for front and rear axles, removing and
installing

ABS system components on front axle, removing and installing

ABS system components for rear axle, (Front wheel drive) removing
and installing

ABS system components for rear axle (all-wheel drive), removing
and installing

ESP system components, removing and installing

Sender for rotation rate -G202- and sensor for transverse
acceleration -G200-, removing and installing

Longitudinal acceleration sensor -G251-, removing and installing

Brake System

ESP sensor unit -G419-, vehicles from my 02.02, removing and
installing

Steering angle sensor -G85-, removing and installing

46 - Brakes - Mechanical components

Front brakes

Front brakes, FS III brake caliper, assembly overview

Front brake pads, removing and installing

Front brakes, FN 3 brake caliper, servicing

Brake pads, removing and installing

Front brakes, 2FN brake caliper, servicing

Brake pads, removing and installing

Rear wheel brakes (disc brakes - front wheel drive), assembly
overview

Rear brake pads, removing and installing

Parking brake, adjusting

Rear wheel brakes/disc brakes (all-wheel drive), servicing

Brake pads, removing and installing

Parking brake, adjusting

Parking brake cables for disc brakes - front wheel drive,
removing and installing

Parking brake cables for disc brakes - all wheel drive, removing
and installing

Parking brake lever, assembly overview

Brake pedal - assembly overview

Brake pedal from brake booster, disconnecting and connecting

Brake pedal, removing and installing

Brake light switch, removing and installing/adjusting

47 - Brakes - Hydraulic components

Front brake calipers, servicing

FS III front brake calipers, servicing

Front brake caliper piston, removing and installing

FN 3 front brake calipers, servicing

Front caliper piston, removing and installing

Front brakes, 2FN brake caliper, Servicing

Front caliper piston, removing and installing

Rear brake caliper, servicing

Rear brake caliper piston, removing and installing

Pressure leak test

Brake pressure regulator, assembly overview

Brake pressure regulator, checking and adjusting

Specifications for load dependent brake pressure regulator

Brake System

Brake system, bleeding

Bleeding brake system with brake filler and bleeder unit VAS 5234,
vehicles with ABS Mark 20

Brake system, bleeding without pressure bleeder

Bleeding brake system with brake filler and bleeder unit VAS 5234,
vehicles with ABS Mark 60

Bleeding brake system without brake filling and bleeding appliance

Brake booster/brake master cylinder for vehicles with
ABS/EDL/ASR/ESP, servicing for vehicles up to my 10.00

Vacuum pump for brake booster (vehicles with Diesel engines),
removing and installing

Brake booster/brake master cylinder for vehicles with
ABS/EDL/ASR/ESP Mark 60 from m.y. 10.00, assembly overview

Sender 1 for brake booster -G201- and Sensor -2- for brake
pressure -G214-, removing and installing

Check function of brake assist in brake booster, vehicles from my
02.02,

Brake system vacuum pump -V192-, removing and installing

Brake system vacuum pump -V192-, checking

Brake booster pressure sensor -G294-, removing and installing

Check function of check valve -A-.

Brake system vacuum pump -V192-, vehicles up to my 05.02,
electrical check

Multi-pin connector with contact assignment

Test table (test steps 1 - 6)

Brake system vacuum pump -V192-, vehicles from my 06.02,
electrical check

Multi-pin connector with contact assignment

Test table (test steps 1 - 4)

Brake master cylinder, removing and installing

Brake booster, removing and installing

Definitions

Additional Information

System Overviews

Other Topics

CAN-BUS Operation

ESP Operation

VAS 5234 Setup and Operation

Brake System