Volkswagen Golf / Golf GTI / Jetta. Manual — part 297
34-93
A - Counter support, e.g. Kukko
22/1
B - Internal extractor 14.5 to 18.5
mm, e.g. Kukko 21/2
Fig. 1
Pulling out selector rod
bushing
Fig. 2
Driving selector rod
mounting bushing in
flush
Clutch housing, servicing
34-94
A - Counter support, e.g. Kukko
22/2
B - Internal extractor 23.5 to 30 mm,
e.g. Kukko 21/4
Note:
The needle bearing is destroyed
during removal and must be
replaced.
Fig. 3
Pulling needle bearing
out of clutch housing
Fig. 4
Pressing needle bearing
-A- into clutch housing
- Before pressing in, lay reverse
shaft thrust washer -B- on needle
bearing.
Clutch housing, servicing
34-95
When transmission is disassembled,
oil seal can be removed with sleeve
30-21.
Fig. 5
Removing output shaft
oil seal
- Pry oil seal out carefully with a
screwdriver.
Fig. 6
Driving in input shaft oil
seal flush
Clutch housing, servicing
34-96
Fig. 7
Pressing reverse gear
selector fork shaft into
clutch housing
Clutch housing, servicing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст