Volkswagen Golf / Golf GTI / Jetta. Manual — part 275
34-14
Installed position of transmission
selector lever/relay lever
1 - Gear selector lever
With balance weight
2 - Relay lever
Locates in guide rail of gear
selector lever via shoe (arrow)
Gear selector mechanism, servicing
34-15
Gear selector mechanism,
removing and installing
Removing
Selector mechanism up to 12.00
Note:
The cable locking mechanisms -A-
or -B- may only be pried off if the
gear selector cable or gate selector
cable or just the cable locking
mechanism is to be replaced.
1 = 13 mm open end wrench,
commercially available
If the above-named parts are not to
be replaced:
- Pry gate selector cable -A- or
gear selector cable -B- off
transmissionusing a 13 mm open
end wrench.
- Secure locking mechanism on
gear selector cable and gate
selector cable by pulling forward
in direction of arrow -1- onto stop
and then turning to left in direction
of arrow -2- to lock.
Gear selector mechanism, servicing
34-16
Selector mechansim from 01.01
Continued for all selector
mechanisms
- Remove securing clip -4- for gear
selector cable from gear selector
lever -1-.
- Remove securing clip -3- for gate
selector cable from relay lever -2-.
- Pry gate selector cable and gear
selector cable off pin (arrows).
- Remove cable support bracket
from transmission (arrows). If
necessary, unclip hose at cable
support bracket first.
Gear selector mechanism, servicing
34-17
- Carefully pry cover off center
console (arrows).
- Pull cover to rear off center
console.
- Remove sound insulation.
- Destroy clip (arrow) and pull shift
lever knob off with cover.
Gear selector mechanism, servicing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст