Volkswagen Golf / Golf GTI / Jetta. Manual — part 1217
- Turn eccentric at spray nozzles with a screwdriver in
direction of - arrow - .
Rear window
Special tools, testers and auxiliary items required
Washer jet adjuster VAS 3125A
Note:
If spray field is uneven or does not adjust to middle of wiper
field, replace washer jet (repair measures).
Never use a needle or similar tool to adjust washer
nozzles, as damage to washer jet water canal may result.
- Check washer jet setting.
Rear window washer jet setting
Spray field should make contact in middle of wiper field.
- If necessary, adjust washer jet with Washer jet adjuster
VAS 3125A .
Headlight wash/wipe system (Golf), check jet
setting, adjust nozzles if necessary
Description of work (part 1 of 2)
13/2/2005
Headlight wash/wipe system (Jetta).
01-7, Headlight
wash/wipe system (Jetta), check jet setting, adjust nozzles
if necessary
Special tools, testers and auxiliary items required
Adjustment tool VAS 3019A
Perform following work sequence:
Spray jet adjustment for left headlight (right headlight is
identical but reversed):
- Check spray jet setting.
a
100 mm
c
55 mm
b
75 mm
d
125 mm
- If necessary, adjust spray nozzles as follows:
Description of work (part 1 of 2)
13/2/2005
- Pull spray nozzles - arrow - out to stop and adjust spray
to applicable points using Adjustment tool VAS 3019A .
Note:
If spray field is uneven or does not adjust to
aforementioned specifications, replace washer jet (repair
measures).
Headlight wash/wipe system (Jetta), check jet
setting, adjust nozzles if necessary
Special tools, testers and auxiliary items required
Adjustment tool VAS 3019A
Perform following work sequence:
Spray jet adjustment for left headlight (right headlight is
identical but reversed):
Description of work (part 1 of 2)
13/2/2005
- Check spray jet setting:
a
165 mm
b
55 mm
- If necessary, adjust spray nozzles as follows:
- Pull spray nozzles - arrow - out to stop and adjust spray
to applicable points using Adjustment tool VAS 3019A .
Note:
If spray field is uneven or does not adjust to
aforementioned specifications, replace washer jet (repair
measures).
Windshield wiper blades, check for damage;
check parked position, if necessary adjust;
with pulsating wiper blades, check angle
setting, adjust if necessary
Windshield wiper blades parked position, adjust
if necessary:
- Perform work sequence
Repair Manual, Electrical
equipment, Rep.-Gr.92; Windshield wash/wipe system;
Description of work (part 1 of 2)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст