Volkswagen Golf / Golf GTI / Jetta. Manual — part 1222
Oil extractor V.A.G 1307 A
or
Oil extractor V.A.G 1358 A
Torque wrench V.A.G 1331/ (5 - 50 Nm)
Note:
If oil is drained and not extracted with oil extractor, replace
seal for oil drain plug. This helps prevent possible leaks.
Observe waste disposal regulations!
Description of work (part 1 of 2)
13/2/2005
Turbo-engines:
- After engine oil and oil filter have been replaced, observe
following when first starting engine:
As long as oil pressure warning light in instrument panel
insert flashes, engine is only to run at idle. Do not touch
accelerator pedal! Bumping accelerator pedal can damage
turbocharger or destroy it completely.
Only when warning light turns off, is full oil pressure
achieved, and engine can be accelerated.
Capacities with filter change:
Additional Information.
Fluid Capacity Charts for appropriate model year
Tightening torque for oil drain plug (Replace if leaking) -
arrow - :
Note:
Remember that following torque specifications must not be
exceeded. A higher torque can lead to leaks in area of
drain plug or even to damage.
4-cylinder engine 30 Nm
6-cylinder engine 30 Nm
Oil specification for gasoline engines:
For oil specification for gasoline engines, please refer to:
⇒ Additional Information. Fluid Capacity Charts for
appropriate model year
Oil specification for diesel engines
For oil specification for gasoline engines, please refer to:
Description of work (part 1 of 2)
13/2/2005
⇒ Additional Information. Fluid Capacity Charts for
appropriate model year
Due to individual characteristics of oils
01-7, Oil
characteristics
use only following released engine oils:
Oil characteristics
Multi-weight oil conforming to VW standard 501 01 has
following characteristics:
All-season use in moderate climate zones.
Excellent cleansing properties.
Secure lubrication properties at all engine temperatures
and load conditions.
High resistance to aging.
Multi-weight light duty oil conforming to VW standard
500 00 furthermore include following characteristics:
All-season use in almost every possible outside
temperature.
Decreases friction loss in engine.
Best possible cold start properties. even at veru low
temperatures.
Multi-weight light duty oil conforming to VW standard
502 00:
This oil is suitable for gasoline engines, conforms to VW
standard 501 00. 505 00. as well as 500 00. furthermore,
includes following characteristics: It is particularly suitable
for use in extreme operating conditions, e.g. difficult road
conditions, predominant use of trailer. abundance of uphill
driving, and driving in hot climate zones.
Note:
Single-grade oils are generally not used all year round
because of their limited viscosity range. Therefore, these
oils should only be used in extreme climate zones.
When using multi-weight oil SAE 5W-30, continuous high
engine speeds and constant strong load must be avoided.
This restriction does not apply to multi-weight light duty oils.
Description of work (part 1 of 2)
13/2/2005
- After topping off with oil wait at least 3 minutes then check
oil level.
- Pull out oil dipstick and wipe with clean rag. Replace
dipstick and push down to stop.
Note:
Observe waste disposal regulations!
- Pull out dipstick and read oil level.
Area a
-
Oil must be topped off. It is sufficient when oil level is within area
- b - after topping
off.
Area b
-
Oil does not have to be topped off.
Area c - Oil must not be topped off.
Note:
If oil level is above area - c - , catalytic converter can be
damaged.
Oil filter, replacing
Special tools, testers and auxiliary items required
Oil filter wrench VAS 3417
Description of work (part 1 of 2)
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст