Volkswagen Golf / Golf GTI / Jetta. Manual — part 804
- Installation is reverse of removal.
Note:
n
When installing material - 1 - of heater element, it
must be connected with backrest cover and backrest
frame - 2 - in groove (depression) utilizing two sided
tape. heater element must be installed over head rest
adjuster guide holes - 3 - and secured with head rest
guide.
Seat heating elements
13/2/2005
74 - 3
Rear seat upholstery and cover
Cover and cushion for seat cushion,
removing and installing
Removing
- Remove seat cushion
72-2, Seat cushion, removing
and installing (Golf wagon/Jetta wagon)
.
- Release beading - 1 - for cover - 2 - from
seat cushion frame - 3 - .
Rear seat upholstery and cover
13/2/2005
- Release tension wire - 1 - for cover - 2 - from upholstery
wire - 3 - .
- Remove cover - 2 - .
Installing
- Installation is reverse of removal.
Cover, center arm rest, removing and
installing
Removing
- Remove right backrest
72-2, Backrest, removing and
installing
.
- Remove center arm rest
72-2, Center arm rest,
removing and installing
.
- Press in locking lug - 1 - - arrow - and open center
Rear seat upholstery and cover
13/2/2005
armrest.
- Separate upper part - 2 - from lower part - 3 - .
- Remove cover - 1 - from plastic tray - 2 - .
Installing
- Installation is reverse of removal.
Cover and cushion for backrest, removing
and installing
Note:
n
Illustration shows right-hand backrest, left-hand
backrest can be removed by modifying se procedures
slightly.
Removing
- Remove headrests.
- Remove right backrest
72-2, Backrest, removing and
installing
.
- Remove center arm rest
72-2, Center arm rest,
removing and installing
.
- Pull out three clips - 2 - .
Rear seat upholstery and cover
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст