Volkswagen Golf / Golf GTI / Jetta. Manual — part 872
01-265
Evaluating display group number 007
Display
zone
Description
Display
Corrective action
1
Driver's mirror
adjustment switch
FS
Open
closed
not
operated
implausible
2)
- Visual check of wiring
- Check lock mechanism
- Check that connections of relevant
current circuit are correctly connected
and seated securely while
simultaneously observing display
- If the display does not change when
operating, repair malfunction or
replace relevant component
- Erase DTC memory
- Perform functional check
- Check DTC memory again
2
Key switch, front
passenger's side
open
closed
not
operated
implausible
3
Driver's interior
locking switch
lock
unlock
not
operated
implausible
2)
4
Interior locking
switch, front
passenger's side -
E198-
1)
locked
unlocked
not
operated
implausible
2)
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
1)
Lock/unlock switch, front passenger's side
2)
Implausible means: both directions simultaneously!
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-266
Break down of display content for display group number 008
Display group 008 -Central control module-
Read measured
value block 8
Indicated on display
xxx
xxx
xxx xxx
1
2
3
4
Display zones
Specification Evaluation
Switch positions, central
locking thermo protection
yes, no
Page 01-
267
Rear lid/tailgate contact switch
1)
open, closed
Rear lid/tailgate Key switch
2)
open, closed,
not oper.
implausible
Hood contact switch
operated,
not operated,
not installed
1)
Lock rotary latch must be engaged in second stage.
2)
Unclip contact switch on lock cylinder housing (with small lever)
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
01-267
Evaluating display group number 008
Display
zone
Description
Display
Corrective action
1
Hood contact
switch
operated
not
operated
not
installed
- Visual check of wiring
- Check that connections of relevant
current circuit are correctly connected
and seated securely whilst
simultaneously observing display
- If the display does not change when
operating, repair malfunction or replace
relevant component
- Erase DTC memory
- Perform functional check
- Check DTC memory again
2
Rear lid/tailgate Key
switch
2)
open
closed
not oper.
implausible
3
Rear lid/tailgate
contact switch
1)
open
closed
implausible
4
Switch position,
central locking
thermo protection
yes, no
1)
Lock rotary latch must be engaged in second stage.
2)
Unclip contact switch on lock cylinder housing (with small lever)
Convenience system (vehicles with power windows), On Board Diagnostic (O...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст