Volkswagen Golf / Golf GTI / Jetta. Manual — part 977
Page
80-9
, Fig.
5
- Remove and
clamp off
coolant
hoses to
heater core
in engine
compartment
at bulkhead.
- Seal off
heater
core
inlet/outlet
to prevent
coolant
from
running
out.
- Locate and
remove
fasteners for
heating and
A/C unit in
engine
compartment
at bulkhead.
- Remove
heating
and A/C
unit.
A/C refrigerant system, servicing
13/2/2005
87-117
Fig. 1
Evaporator seal,
installing
- Glue foam seal -B- around
circumference of evaporator -A-.
- To allow evaporator water to
drain, do not attach foam seal on
evaporator in area -C-.
Fig. 2
Evaporator inlet/outlet
seal, installing
- Insert seal -A- for refrigerant lines
-C- in between housing halves -B-
.
A/C refrigerant system, servicing
13/2/2005
87-118
A/C
refrigerant
system
pressures
and
temperatures,
checking
The pressures
and
temperatures in
the A/C system
will vary
depending on
engine speed
(RPM), coolant
fan speed,
engine coolant
temperature,
A/C clutch
engagement,
outside
temperature,
humidity, etc.
Pressure and
temperature
specifications
are based on
the following:
Pressure and
temperature
specifications
Page 87-120
.
Engine
speed
(RPM) at
1500
Fresh air
blower on
high speed
A/C adjusted
to Max.
cooling
A/C refrigerant system, servicing
13/2/2005
1 - Evaporator
2 - Low
pressure
service
valve
3
-
Compressor,
low pressure
side
4
-
Compressor,
high
pressure
side
5 - Condenser
A/C refrigerant system, servicing
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст