Volkswagen Golf / Golf GTI / Jetta. Manual — part 941
Page 80-
6
, Fig. 2
Manual A/C
13/2/2005
87-6
Servo motor for
fresh/recirculating air door -V154-,
removing and installing
Removing
- Remove glove box.
Repair Manual, Body Interior,
Repair Group 68
Installing
- Disconnect electrical connector -
1-.
- Remove screw -3-.
- Swing motor -2- downward.
- Disengage motor -2- from fresh
air/recirculation air lever.
- Engage flap motor -2- to fresh
air/recirculation air lever.
- Position fresh air/recirculated air
flap lever by hand depending on
position of flap motor.
- Install screw -3-.
Manual A/C
13/2/2005
87-7
Heating and A/C controls,
removing and installing
Special tools and equipment
required
First do the following:
Repair Manual, Body Interior,
Repair Group 68
Repair Manual, Body Interior,
Repair Group 68
Repair Manual, Body Interior,
Repair Group 68
Special hook 3370
- Remove glove box.
- Remove trim under the steering
column.
- Remove center console.
Manual A/C
13/2/2005
87-8
Removing
- Pull off heating controls trim panel
with tool 3370.
- Remove screws -arrows-.
- Remove center trim.
- Remove controls with cables
attached.
- Disengage cables from controls.
- Disconnect electrical connectors.
Manual A/C
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст