Volkswagen Golf / Golf GTI / Jetta. Manual — part 883
01-308
- Press button -1- for "Rapid data
transfer" mode.
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
Address word for the central
locking: 35
Rapid data transfer
HELP
Enter address word XX
Indicated on display:
- Press buttons -3- and -5-.
Rapid data transfer
Q
35 Central locking
Indicated in display after entering the
address word 35:
and then the following appears in the
display:
- Confirm entry with the -Q- button.
Rapid data transfer
Tester sends the address word 35
Indicated on display:
1C0962258 XX Cent. Lock.
0001
Coding XXXXX
WSC XXXXX
The control module identification will
be shown on the V.A.G 1551
display, e.g.:
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Central locking system (vehicles without power windows), On Board Diagnostic (O...
13/2/2005
01-309
Selectable functions, overview
page
01 - Check Control Module
Version
Page 01-310
02 - Check DTC Memory
Page 01-317
03 - Output Diagnostic Test
Mode
Page 01-344
05 - Erase DTC Memory
Page 01-320
06 - End Output
Page 01-322
07 - Code Control Module
Page 01-313
08 - Read Measuring Value
Block
Page 01-347
10 - Adaptation
Page 01-372
Note:
A list of possible functions is printed out after
pressing the HELP button.
Do not select further functions, which can be
printed out after pressing the HELP button.
After the function is completed the V.A.G 1551
returns to the following start position:
Rapid data transfer
HELP
Select function XX
Indicated on display:
Central locking system (vehicles without power windows), On Board Diagnostic (O...
13/2/2005
01-310
Check Control Module Version
- Connecting scan tool
Page 01-3
, initiating On
Board Diagnostic (OBD)
Page 01-307
.
- Switch on ignition.
- Press button -1- for "Rapid data transfer"
mode.
- Switch on printer with Print button (warning lamp
in button lights up).
- Press buttons -0- and -1-.
Rapid data transfer
Q
01-Check Control Module Version
Indicated on display:
- Confirm entry with the -Q- button.
1C0962258 XX Cent. Lock.
0001
Coding XXXXX
WSC XXXXX
The control module identification will be shown on
the V.A.G 1551 scan tool display, e.g.:
Central locking system (vehicles without power windows), On Board Diagnostic (O...
13/2/2005
01-311
Breakdown of the display:
Upper
line
Part No. of control
module
system designation
(XX
2)
Cent. Locking 0001)
Lower
line
Code number
(dealer code number)
1)
1)
- Will be automatically stored in the
control module when entering the
system.
2)
A number or number/letter
combination (03 or 6Q, or others)
indicate a correct programming of the
control module.
- Press
button.
Rapid data transfer
HELP
Select function XX
Indicated on display:
Central locking system (vehicles without power windows), On Board Diagnostic (O...
13/2/2005
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст