Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 400
Upper Half of Image: Vehicles without Side Padding
Lower Half of Image: Vehicles with Side Padding
1 - Wheel Housing Trim Panel
❑ Removing and instal‐
ling. Refer to
2 - Clip
❑ Insert in the trim panel
❑ Remove the clips that
are still in the mounting
points on the body using
the Omega Clip Tool -
T40280-
❑ Replace damaged or
deformed retaining clips
3 - Nut
❑ 3.5 Nm
4 - Clip
❑ For attaching the sill
panel strip
❑ Insert into the wheel
housing trim panel
❑ Replace damaged or
deformed retaining clips
5 - Wheel Housing Trim Panel
❑ Removing and instal‐
ling. Refer to
6 - Clip
❑ Insert in the trim panel
❑ Remove the clips that are still in the mounting points on the body using the Omega Clip Tool - T40280-
❑ Replace damaged or deformed retaining clips
7 - Clip
❑ For attaching the sill panel strip
❑ Insert into the wheel housing trim panel
❑ Replace damaged or deformed retaining clips
5.9
Overview - Foot Rest and Carpet
1 - Footrest
❑ Removing and instal‐
ling. Refer to
.
❑ Must engage complete‐
ly in the bracket
2 - Nut
❑ 2 Nm
❑ Quantity: 3
3 - Bracket
❑ Removing and instal‐
ling. Refer to
.
4 - Carpet
❑ One piece
❑ Removing and instal‐
ling. Refer to
5.10
Sill Panel Strip, Removing and Installing
⇒ “5.10.1 Sill Panel Strip, Removing and Installing, 2-Door Se‐
dan”, page 249
⇒ “5.10.2 Sill Panel Strip, Removing and Installing, 4-Door Sedan
5.10.1
Sill Panel Strip, Removing and Instal‐
ling, 2-Door Sedan
Note
The following describes the removing and installing on the left
side of the vehicle. Removing and installing on the right side is
identical.
Special tools and workshop equipment required
♦ Wedge Set - T10383-
Removing
– Remove the rear bench seat. Refer to
⇒ “3.7 Bench Seat/Single Seat, Removing and Installing”,
– Loosen the sill panel -1- from the side sill and door seal mold‐
ing using the Wedge Set - T10383- in direction of -arrows-.
– Remove the expanding clip -1-.
– Release the sill panel strip retaining tab -3- from the side trim
panel using the Wedge Set - T10383- in direction of
-arrow A-.
– Remove the sill panel strip -2- at the same time forward from
the side trim panel in direction of -arrow B-.
– Remove the sill panel strip.
Installing
Note
♦
Check all the fasteners for damage and replace if necessary.
♦
Remove any remaining clips in the body mounting points using
the Omega Clip Tool - T40280- . To install, insert into the sill
panel strip.
♦
Make sure that the sill panel strip is inside the door seal mold‐
ing after installing.
Install in reverse order of removal.
5.10.2
Sill Panel Strip, Removing and Instal‐
ling, 4-Door Sedan and Wagon
Note
The following describes the removing and installing on the left
side of the vehicle. Removing and installing on the right side is
identical.
Special tools and workshop equipment required
♦ Wedge Set - T10383-
Removing
– Remove the rear bench seat. Refer to
⇒ “3.7 Bench Seat/Single Seat, Removing and Installing”,
– Remove the expanding clip -1-.
– Release the sill panel strip retaining tabs -2- from the lower B-
pillar trim panel -3- using the Wedge Set - T10383- in direction
of -arrow A-.
– Loosen the sill panel -1- from the side sill and door seal mold‐
ing using the Wedge Set - T10383- in direction of -arrows-.
– Remove the sill panel strip -1- slightly forward at the same
time.
– Open the belt guide cover and guide the seat belt out.
– Remove the sill panel strip.
Installing
Note
♦
Check all the fasteners for damage and replace if necessary.
♦
Remove any remaining clips in the body mounting points using
the Omega Clip Tool - T40280- . To install, insert into the sill
panel strip.
♦
Make sure that the sill panel strip is inside the door seal mold‐
ing after installing.
Install in reverse order of removal.
5.11
A-Pillar Gap Cover, Removing and In‐
stalling
Note
The following describes the removing and installing on the left
side of the vehicle. Removing and installing on the right side is
identical.
Special tools and workshop equipment required
♦ Trim Removal Wedge - 3409-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст