Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 922
⇒ “1.1.5 Overview - Headlamp Housing Repair Set”, page 101
1.1.1
Overview - Halogen Dual Headlamp
1 - Bulb for Position Lamp/Day‐
time Running Lamp/High
Beam Headlamp
❑ The lamp has three
functions:
❑ Left Position Lamp Bulb
- M1- / Right Position
Lamp Bulb - M3-
❑ Left Daytime Running
Lamp Bulb - L174- /
Right Daytime Running
Lamp Bulb - L175-
❑ Left High Beam Head‐
lamp Bulb - M30- / Right
High Beam Headlamp
Bulb - M32-
❑ Removing and instal‐
ling. Refer to
.
2 - Socket
❑ For bulb for position
lamp/daytime running
lamp/high beam head‐
lamp
3 - Housing Cover
4 - Housing Cover
5 - Headlamp Beam Adjust‐
ment Motor
❑ Left Headlamp Beam
Adjustment Motor - V48-
❑ Right Headlamp Beam
Adjustment Motor - V49-
❑ Removing and installing. Refer to
⇒ “1.8.1 Left/Right Headlamp Beam Adjustment Motor V48 / V49 , Removing and Installing, Halogen
6 - Housing Cover
7 - Housing Cover
8 - Bulb Socket
❑ To the low beam headlamp bulb mount
9 - Low Beam Headlamp Bulb
❑ Left Low Beam Headlamp Bulb - M29-
❑ Right Low Beam Headlamp Bulb - M31-
❑ Removing and installing. Refer to
⇒ “1.9 Low Beam Headlamp Bulb, Removing and Installing”, page 113
10 - Bolt
❑ 8 Nm
❑ For attaching on the upper longitudinal member
11 - Adjusting Element
12 - Bolt
❑ 4 Nm
❑ Only loosen
❑ For attaching to the headlamp mount
13 - Balancing Element
14 - Spring Nut
15 - Bolt
❑ 4 Nm
❑ For attaching the bumper guide
16 - Headlamp
❑ Removing and installing. Refer to
⇒ “1.2 Headlamp, Removing and Installing”, page 101
17 - Impact Screw
❑ For adjusting the headlamp parallel to the hood edge
18 - Banjo Bolt
❑ For the headlamp height adjustment
19 - Bolt
❑ 4 Nm
❑ For attaching to the lock carrier
20 - Front Turn Signal Bulb
❑ Left Front Turn Signal Bulb - M5-
❑ Right Front Turn Signal Bulb - M7-
❑ Removing and installing. Refer to
21 - Socket
❑ For the front turn signal lamp
1.1.2
Overview - HID Headlamp
1 - Headlamp
❑ Removing and instal‐
ling. Refer to
.
2 - Front Turn Signal Bulb
❑ Left Front Turn Signal
Bulb - M5-
❑ Right Front Turn Signal
Bulb - M7-
❑ Removing and instal‐
ling. Refer to
3 - Cornering Lamp Bulb
❑ Left Cornering Lamp
Bulb - L148-
❑ Right Cornering Lamp
Bulb - L149-
❑ Removing and instal‐
ling. Refer to
.
4 - Housing Cover
5 - HID Headlamp Bulb
❑ With integrated ignition
coil
❑ Left HID Headlamp Bulb
- L13-
❑ Right HID Headlamp Bulb - L14-
❑ Removing and installing. Refer to
⇒ “1.11 Left/Right HID Headlamp Bulb L13 / L14 , Removing and Installing”, page 115
.
6 - Headlamp Beam Adjustment Motor
❑ Left Headlamp Beam Adjustment Motor - V48-
❑ Right Headlamp Beam Adjustment Motor - V49-
❑ Removing and installing. Refer to
⇒ “1.8.2 Left/Right Headlamp Beam Adjustment Motor V48 / V49 , Removing and Installing, HID Head‐
7 - Housing Cover
❑ 2 Nm
❑ With screws
❑ Quantity: 5
8 - Bolt
❑ 4 Nm
❑ With balancing element
9 - Bolt
❑ 8 Nm
❑ With balancing element
10 - Bolt
❑ 4 Nm
11 - HID Headlamp Control Module
❑ Left HID Headlamp Control Module - J343-
❑ Right HID Headlamp Control Module - J344-
❑ Removing and installing. Refer to
⇒ “1.17 Left/Right HID Headlamp Control Module J343 / J344 , Removing and Installing”, page 120
.
❑ Screws: 2 Nm
12 - Headlamp Range Control Module - J431-
❑ Removing and installing. Refer to
⇒ “11.2 Control Module for Headlamp Range/Cornering Lamp and Headlamp Range, Removing and
.
13 - Level Control System Sensor
❑ Removing and installing. Refer to ⇒ Suspension, Wheels, Steering; Rep. Gr. 43 ; Level Control System
Sensor .
14 - Impact Screw
❑ For adjusting the headlamp parallel to the hood edge
15 - Bolt
❑ 4 Nm
❑ With banjo bolt
❑ For the headlamp height adjustment
16 - Daytime Running Lamp Bulb
❑ Left Daytime Running Lamp Bulb - L174-
❑ Right Daytime Running Lamp Bulb - L175-
❑ Removing and installing. Refer to
⇒ “1.13.2 Left/Right Daytime Running Lamp Bulb L174 / L175 , Removing and Installing, HID Headlamp”,
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст