Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 767
Contents
Safety Precautions when Working on Vehicles with Start/Stop System . . . . . . . . . . . . . .
ABS Control Module J104 / ABS Hydraulic Unit N55 , Removing and Installing . . . . . . . . 17
Right/Left Front ABS Wheel Speed Sensor G45 / G47 , Removing and Installing . . . . . . 37
Right/Left Rear ABS Wheel Speed Sensor G44 / G46 , Removing and Installing . . . . . . . . 38
00 – General, Technical Data
1
Safety Precautions
(Edition 12.2015)
⇒ “1.1 Safety Precautions during Road Test with Testing Equip‐
ment”, page 1
⇒ “1.2 Safety Precautions when Working on Vehicles with Start/
1.1
Safety Precautions during Road Test
with Testing Equipment
If the Use of Testing Equipment Is Required on Road Tests, Note
the Following:
WARNING
Distraction and unsecured testing equipment increase the risk
of an accident.
♦ Operating testing equipment while driving causes distrac‐
tions.
♦ Testing equipment that is not secure increases the risk of
injury.
♦ Always secure testing equipment on the rear seat.
♦ Have a second person operate the testing equipment.
♦ Operate the testing equipment from the rear seat.
♦ Do not operate the testing equipment from the front pas‐
senger seat.
♦ The deployment of the front passenger airbag during an
accident can cause injury to the person.
1.2
Safety Precautions when Working on
Vehicles with Start/Stop System
Note the following When Working on Vehicles with a Start/Stop
System:
WARNING
There is a risk of injury due to the engine starting automatically
in vehicles with the Start/Stop System.
♦ If necessary, the engine can start automatically for vehi‐
cles with an active Start/Stop System.
♦ This is recognized by a message in the instrument cluster.
♦ Therefore, make sure that the Start/Stop System is deac‐
tivated when working on the vehicle (turn off ignition, turn
the ignition back on when necessary).
2
Identification
⇒ “2.1 PR Number Allocation - Brakes”, page 2
2.1
PR Number Allocation - Brakes
⇒ “2.1.1 General Information”, page 2
⇒ “2.1.2 Front Brakes”, page 2
⇒ “2.1.3 Rear Brakes”, page 2
2.1.1
General Information
The PR number on the vehicle data label describes which brake
system is installed in the vehicle.
There is a vehicle data label in the spare wheel well and also one
in the customer Maintenance booklet.
– For information regarding each brake installed. Refer to ELSA/
Vehicle Individual.
In this example, the vehicle has “1KU” rear brakes.
♦ For allocation. Refer to the Parts Catalog.
♦ The following tables explain the PR numbers. These are im‐
portant for the combination brake caliper/brake rotor and
brake pad.
2.1.2
Front Brakes
PR Number
Front Brakes
1ZE/1ZP
PC57 (15”)
1ZB/1ZD/1LV
PC57 (16”)
1LJ/1LM
C60 (17”)
1LJ
PC60 (17”)
2.1.3
Rear Brakes
Rear Axle
PR Number
Rear Brakes
Torsion Beam Rear Suspension
1KD
C 38
Torsion Beam Rear Suspension
1KD/1KQ
CI 38 (15”)
Torsion Beam Rear Suspension
1KD/1KQ
CI 38 HRA
Multi-Link Rear Axle
1KS/1KT
PC 38 HRA
Multi-Link Rear Axle
1KS/1KT
TRW
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст