Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 906
– Press the cap on the carbon brushes -A- down in direction of
-arrow- until it is flush with the voltage regulator housing.
– Install new cap -1- on the Generator - C- .
Tightening Specifications
Component
Tightening Specification
Voltage Regulator - C1- screws
4 Nm
3
Starter
⇒ “3.1 Overview - Starter”, page 30
⇒ “3.2 Starter, Removing and Installing”, page 33
3.1
Overview - Starter
⇒ “3.1.1 Overview - Starter, Vehicles with Manual Transmission”,
page 30
⇒ “3.1.2 Overview - Starter, Vehicles with DSG Transmission
DQ200–7F”, page 31
⇒ “3.1.3 Overview - Starter, Vehicles with DSG Transmission
DQ250-6F”, page 32
⇒ “3.1.4 Overview - Starter, Vehicles with Automatic Transmis‐
3.1.1
Overview - Starter, Vehicles with Manual Transmission
1 - Starter - B-
❑ Removing and instal‐
ling. Refer to
2 - Double Bolt
❑ 80 Nm
3 - Ground Cable
❑ Depending on the vehi‐
cle equipment level
4 - Nut
❑ 20 Nm
❑ Depending on the vehi‐
cle equipment level
5 - Connector
6 - Nut
❑ 20 Nm
7 - Cap
8 - Terminal 30/B+
9 - Nut
❑ 20 Nm
❑ Depending on the vehi‐
cle equipment level
10 - Ground Cable
❑ Depending on the vehi‐
cle equipment level
11 - Bracket
❑ For the wiring harness
3.1.2
Overview - Starter, Vehicles with DSG Transmission DQ200–7F
1 - Starter - B-
❑ Removing and instal‐
ling. Refer to
2 - Double Bolt
❑ 80 Nm
3 - Ground Cable
4 - Nut
❑ 20 Nm
5 - Connector
6 - Nut
❑ 20 Nm
7 - Cap
8 - Terminal 30/B+
9 - Bolt
❑ 80 Nm
3.1.3
Overview - Starter, Vehicles with DSG Transmission DQ250-6F
1 - Starter - B-
❑ Removing and instal‐
ling. Refer to
2 - Bolt
❑ 40 Nm
3 - Connector
4 - Nut
❑ 20 Nm
5 - Cap
6 - Terminal 30/B+
7 - Nut
❑ 20 Nm
8 - Ground Cable
9 - Double bolt
❑ 40 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст