Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 386
14
Special Tools
Special tools and workshop equipment required
♦ Wedge Set - T10383-
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
♦ Release Tool Set - Extraction Tool 17 - VAS1978/17- from the
Release Tool Set - VAS1978/35-
70 – Interior Trim
1
Front Door Trim Panels
⇒ “1.1 Overview - Front Door Trim Panel”, page 193
⇒ “1.2 Front Door Trim Panel, Removing and Installing”,
page 194
⇒ “1.3 Mirror Cover Trim, Removing and Installing”, page 198
⇒ “1.4 Interior Door Mechanism, Removing and Installing”,
page 198
⇒ “1.5 Trim Molding, Removing and Installing”, page 199
1.1
Overview - Front Door Trim Panel
Note
♦
The overview illustration shows the driver side front door trim panel. The illustration for the front passenger
side is identical.
♦
The overview illustration applies to vehicles with 4 doors. The illustration for vehicles with 2 doors is identical.
1 - Door Trim Panel
❑ Removing and instal‐
ling. Refer to
2 - Central Locking -SAFE- In‐
dicator Lamp - K133-
❑ Driver door only
❑ Component Location
Overview. Refer to ⇒
Electrical Equipment;
Rep. Gr. 96 ; Lamps;
Component Location
Overview - Front Door
Lamps .
3 - Sleeve
❑ For Central Locking -
SAFE- Indicator Lamp -
K133-
❑ Driver door only
4 - Mirror Cover Trim
❑ Removing and instal‐
ling. Refer to
.
5 - Clip
❑ Quantity: 2
❑ Replace damaged or
deformed clips
6 - Exterior Rearview Mirror Adjuster - EX11-
❑ With Driver Interior Locking Button - E308-
❑ Component Location Overview. Refer to ⇒ Electrical Equipment; Rep. Gr. 96 ; Controls; Component
Location Overview - Front Door Controls .
7 - Screw
❑ 4.5 Nm
❑ Quantity: 2
8 - Grip Recess Upper Section
9 - Rear Reflector
❑ Component Location Overview. Refer to ⇒ Electrical Equipment; Rep. Gr. 96 ; Lamps; Component
Location Overview - Front Door Lamps .
10 - Power Window Control Head in Driver Door - E512-
❑ Component Location Overview. Refer to ⇒ Electrical Equipment; Rep. Gr. 96 ; Controls; Component
Location Overview - Controls in Front Doors .
11 - Clip
❑ 2-door: quantity: 7
❑ 4-door: quantity: 6 (one of which is the left upper crash clip -arrow-)
❑ Insert in the trim panel
❑ Replace damaged or deformed clips
12 - Trim Molding
❑ Allocation. Refer to the Parts Catalog.
❑ Removing and installing. Refer to
⇒ “1.5 Trim Molding, Removing and Installing”, page 199
.
1.2
Front Door Trim Panel, Removing and
Installing
Note
♦
The removal and installation for the driver side front door trim
panel is described. The removal and installation for the front
passenger side is identical.
♦
The removal and installation for vehicles with 4-doors is
shown. The removal and installation for 2-door vehicles is
identical.
Special tools and workshop equipment required
♦ Trim Removal Wedge - 3409-
♦ Wedge Set - T10383-
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
Removing
– Turn off the ignition and all electrical equipment and remove
the ignition key.
– Remove the handle molding upper section -1- with the Trim
Removal Wedge - 3409- from the mounts in the door trim pan‐
el.
– Remove the bolts -1-.
– Turn/release the clip -1- 90° in direction of the -arrow- (
1
/4 of
a turn) using the open-end wrench (10 mm).
• Clip -arrow- is loosened.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст