Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 704
– Remove the air guide -A- in the direction of -arrows- from the
auxiliary cooler.
Note
Place a cloth underneath to catch any escaping coolant.
– Clamp off the coolant hoses -A and B- with Hose Clamps - Up
To 25mm - 3094- . Open the spring clamps and remove the
hose clamp from the auxiliary cooler.
– Remove the bolts -arrows-. Remove the auxiliary cooler -A-
upward from the bracket.
Installing
Install in reverse order of removal. Note the following:
– Install the front bumper cover. Refer to ⇒ Body Exterior; Rep.
Gr. 63 ; Front Bumper; Bumper Cover, Removing and Instal‐
ling .
– Install the wheel housing liner. Refer to ⇒ Body Exterior; Rep.
Gr. 66 ; Wheel Housing Liner; Front Wheel Housing Liner,
Removing and Installing .
– Install the noise insulation. Refer to ⇒ Body Exterior; Rep. Gr.
66 ; Noise Insulation; Overview - Noise Insulation .
– Install the wheel. Refer to ⇒ Suspension, Wheels, Steering;
Rep. Gr. 44 ; Wheels and Tires .
Tightening Specifications
♦ Refer to
⇒ “4.2 Overview - Auxiliary Cooler”, page 245
.
5
Special Tools
Special tools and workshop
equipment required
♦ Cooling System Tester -
Adapter - VAG1274/8-
♦ Hose Clip Pliers -
VAS6340-
♦ Cooling System Charge Kit
- VAS6096-
♦ Shop Crane - Drip Tray -
VAS6208-
♦ Refractometer - T10007A-
♦ Torque Wrench 1331 Insert - Ring Wrench - 12mm - T10360-
♦ Cooling System Tester - VAG1274B-
♦ Cooling System Tester - Adapter - VAG1274/8-
♦ Cooling System Tester - Adapter - VAG1274/9-
♦ Hose Clip Pliers - VAS6340-
♦ Hose Clamps - Up To 25mm - 3094-
♦ Not Illustrated:
♦ Hose Clip Pliers - VAS6362-
♦ Torque Wrench 1410 - VAG1410-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст