Volkswagen Golf Variant, Jetta. Manual — part 31
♦ Torque wrench -V.A.G 1331-
♦ Torque wrench -V.A.G 1332-
♦ Sealing grease -G 052 128 A1-
♦ Drip tray
Perform the following steps:
Note
♦
Do not remove both securing bolts in left and right flange shafts
at the same time. If the differential bevel gears turn, it is difficult
to reinstall the bolts.
♦
Remove drive shaft from gearbox and carefully lay to side.
Drive shaft is fixed onto suspension strut with tensioning belt
-T10038- .
♦
You do not need to remove the centre bolt of the drive shaft.
- noise insulation .
overview - front wheel housing liner .
– If present: Unbolt front left vehicle level sender -G78- from
suspension link.
left vehicle level sender -G78- .
– Turn steering wheel to left lock and remove left drive shaft from
shafts .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
1. Oil seals
121
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст