Volkswagen Passat / Passat Variant (2011 year). Manual — part 45
8
Renewing rear roof cross member
(Variant)
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
Roof already removed.
• Variant
• Variant with panorama sliding sunroof
1 - Rear roof cross member
2 - Bonded section
Passat 2011 ➤ , Passat Variant 2011 ➤
8. Renewing rear roof cross member (Variant)
177
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
8.2
Removing
Note
Roof cross member and roof cross member reinforcement are cut
out together.
– Separate original joint.
Passat 2011 ➤ , Passat Variant 2011 ➤
178
surface back to bare metal.
8.3
Installing
Note
Only welding units authorised by Volkswagen AG may be used
8.3.1
Preparing new part
New part
♦ Rear roof cross member (Variant)
♦ 2K body adhesive -D 180 KD3 A2-
Passat 2011 ➤ , Passat Variant 2011 ➤
8. Renewing rear roof cross member (Variant)
179
8.3.2
Welding in
Note
New part must be welded in within 90 minutes or adhesion of adhesive will be impaired.
– Apply 2K body adhesive -D 180 KD3 A2- to areas bonded in
the factory.
Passat 2011 ➤ , Passat Variant 2011 ➤
180
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст