Volkswagen Passat / Passat Variant (2011 year). Manual — part 18
Cutting thread
– Cut thread with thread-cutting tap
– Clean threaded sleeve (with compressed air).
7.3.3
Inserting thread insert
– Screw thread insert -3- onto fitting spindle until the fitting pin
-2- contacts the fitting lug -1- on the fitting spindle.
Passat 2011 ➤ , Passat Variant 2011 ➤
7. Repairing threads for securing subframe (suspension subframe)
69
thread insert is flush with the outer edge of the threaded plate
(visual check).
– Then screw thread insert inwards a
1
/4 turn.
Note
Thread insert must screw in easily.
– Remove fitting spindle.
– Break off drive pin of thread insert using pin breaker.
– Install subframe (suspension subframe) ⇒ Suspension, axles,
Passat 2011 ➤ , Passat Variant 2011 ➤
70
8
Renewing front longitudinal member
Includes: bumper mounting
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
1 - Parting cut (cover plate)
2 - Parting cut (longitudinal
member)
Passat 2011 ➤ , Passat Variant 2011 ➤
8. Renewing front longitudinal member
71
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
8.2
Removing
– Separate original joint.
Passat 2011 ➤ , Passat Variant 2011 ➤
72
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст