Volkswagen Passat / Passat Variant (2011 year). Manual — part 28

♦ Tensioning strap -T10038-

♦ Suction lifter -V.A.G 1344-

Passat 2011 ➤ , Passat Variant 2011 ➤

2. Renewing roof - vehicles with sliding/tilting sunroof

109

Removing

Note

♦

Apply textile adhesive tape on left and right roof members parallel to laser solder seams. This reduces

danger of damage and contamination during repairs.

♦

When separating, ensure sufficient distance of to roof member -2- is kept, to assure it is not damaged during

repairs.

♦

When making parting cuts -1-, ensure that the panels lying behind are not damaged.

– Separate original joint to front and rear roof cross members.
– From interior, separate bonded joints to front and rear roof

cross members.

– Roughly cut roof out parallel to laser solder seams.

Passat 2011 ➤ , Passat Variant 2011 ➤

110

Note

♦

Roof side member -1- must not be damaged when removing residual remains of roof -2-.

♦

Use flap or felt discs only, do not use cutting disks or rough grinding disks.

Passat 2011 ➤ , Passat Variant 2011 ➤

2. Renewing roof - vehicles with sliding/tilting sunroof

111

roof cross members.

– Remove all adhesive residues from left and right roof side

members.

– Touch up paint damage in accordance with Paint Workshop

Manual.

2.3

Installing

Note

Only welding units authorised by Volkswagen AG may be used

⇒ page 108

.

2.3.1

Preparing new part

New part
♦ Roof
♦ 1K assembly adhesive -D 190 MKD A3- (3 cartridges)

Passat 2011 ➤ , Passat Variant 2011 ➤

112