Volkswagen Passat / Passat Variant (2011 year). Manual — part 21
Passat 2011 ➤ , Passat Variant 2011 ➤
8. Renewing front longitudinal member
81
9
Renewing front longitudinal member
- part section
Includes: bumper bracket and longitudinal member reinforcement
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
1 - Cover plate
2 - Longitudinal member
3 - Laser weld seam
Passat 2011 ➤ , Passat Variant 2011 ➤
82
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
9.2
Removing
Note
♦
The parting cut for cover plate -1- and the parting cut for longitudinal member -2- must be offset.
♦
Do not cut or weld 50 mm before or after the laser weld seam -3- (shaded area).
Passat 2011 ➤ , Passat Variant 2011 ➤
9. Renewing front longitudinal member - part section
83
cording to degree of damage and cut out.
Caution
The parting cut for the longitudinal member is permitted only
in the area shown. If the longitudinal member is damaged be‐
yond this area, it must be renewed entirely.
– Position parting cut -1- for cover plate as shown and cut out.
– Separate original joint.
– Remove cover plate.
Passat 2011 ➤ , Passat Variant 2011 ➤
84
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст