Volkswagen Passat / Passat Variant (2011 year). Manual — part 93
tween lock reinforcement and wheel housing liner.
– Check fit with side panel.
– Weld in lock reinforcing, RP spot weld seam.
– Install side panel
Passat 2011 ➤ , Passat Variant 2011 ➤
14. Renewing outer wheel housing liner (Variant)
369
15
Renewing spare wheel well
WARNING
Observe safety notes!
Safety notes ⇒ General Information; Body Repairs, General Body
Repairs ; Safety notes
1 - Spare wheel well (bonded)
2 - Rear longitudinal member
3 - Floor panel
15.1
Tools
Special tools and workshop equipment required
Passat 2011 ➤ , Passat Variant 2011 ➤
370
♦ Double-cartridge gun -VAS 5237-
♦ Electric cutter -V.A.G 1561/A-
Passat 2011 ➤ , Passat Variant 2011 ➤
15. Renewing spare wheel well
371
Removing
– Roughly cut out spare wheel well at edge -parting line- using
pneumatic sabre saw -V.A.G 1523/A- .
– Leave bonding flange -1-.
Passat 2011 ➤ , Passat Variant 2011 ➤
372
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст