Volkswagen Jetta / Jetta Hybrid. Manual — part 22
1 - Door
❑ Removing and installing
⇒ page 78
❑ Adjusting
⇒ page 82
2 - Cable
❑ From bearing bracket
-3- to door lock -12-
3 - Bearing bracket
❑ Removing and installing
⇒ page 103
4 - Door handle
❑ Removing and installing
⇒ page 98
5 - Lock cylinder
❑ Removing and installing
⇒ page 93
❑ Not always installed in
front passenger door,
depending on the extras
in vehicle
6 - Base
7 - Cover
❑ Removing and installing
with lock cylinder
⇒ page 92
.
❑ Removing and installing
without lock cylinder
⇒ page 95
.
8 - Window slot outer seal
❑ Removing and installing
⇒ page 108
9 - Retaining bracket
❑ For door trim panel threaded connections.
10 - Securing rivet
❑ For retaining bracket -9-
11 - Bolt
❑ Qty. 2.
❑ Specified torque: 18 Nm
12 - Door lock
❑ Removing and installing
⇒ page 100
13 - Cover
❑ Removing and installing
⇒ page 86
14 - Door joint seal
❑ Removing and installing
⇒ page 112
15 - Loudspeaker
❑ Riveted into door.
16 - Bolt
❑ Qty. 2.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Door components
85
❑ Removing and installing
⇒ page 88
18 - Window slot inner seal
❑ Removing and installing
⇒ page 105
19 - Door window
❑ Removing and installing
⇒ page 206
2.3
Removing and installing door cover
Note
The removal and installation sequence is only for the right cover.
Removal and installation of the left door cover is analogous.
2.3.1
Removing
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
86
– Lift lower end of cover -1-.
– Pull cover -1- downwards and take out of door -4-.
Note
If required for subsequent work, pull cable -2- with grommet -3- out of cover -1- and detach connector (if there
is one) at grommet.
2.3.2
Installing
Carry out following work:
– Pull cable -2- through cover -1- and secure grommet -3-.
– Insert cover -1- upwards into door -4-.
– Press cover -1- upwards into door -direction of arrow-.
– Connect connector (if there is one) at grommet -3-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Door components
87
strap
Note
Removal and installation are described only for the right door re‐
taining strap. The removal and installation of the left door retaining
strap is similar.
2.4.1
Removing
Carry out following work:
– Removing front door trim ⇒ General body repairs, interior;
Rep. gr. 70 ; Door trim .
– Remove riveted loudspeaker.
– Unscrew bolt -2- in A-pillar.
– Unscrew bolts -3- and then remove door retaining strap -1-
through the opening of the loudspeaker.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
88
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст