Volkswagen Jetta / Jetta Hybrid. Manual — part 66
3.1
Tools
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1783-
3.2
Removing and installing radiator grille
Note
♦
The description applies to all models.
♦
Only optical differences exist depending on model.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
3. Radiator grille
261
Carry out following work:
– Remove bolts -3-.
– Pull radiator grille -1- out of front bumper cover -2- in direction
of -arrow a-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
262
Carry out following work:
– Push radiator grille -1- into front bumper cover -2-.
– With slight pressure, engage radiator grille -1- -arrow b- in front
bumper cover -2-.
Note
Align radiator grille -1- if necessary.
– Fit bolts -3- and tighten them.
Specified torque for bolts -3-: 2 Nm.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
3. Radiator grille
263
3.3.1
Removing
Carry out following work:
– Remove radiator grille
⇒ page 261
.
– Disengage all locking hooks -arrows- of the trim cover with VW
emblem -1-.
– Remove trim cover with VW emblem -1- from support -2-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
264
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст