Jeep Wrangler (2018 year). Manual — part 32
Customer Programmable Features — Uconnect 3
Settings
Push the “Settings” button on the touchscreen to display
the settings menu screen. In this mode the Uconnect
system allows you to access all of the available program-
mable features.
NOTE:
Only one touchscreen area may be selected at a
time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting and make
your selection. Once the setting is complete, either press
the back arrow/Done button on the touchscreen or the
Back button on the faceplate to return to the previous
menu. Pressing the Up or Down Arrow buttons on the
right side of the screen will allow you to toggle up or down
through the available settings.
NOTE:
All settings should be changed with the ignition in
the “RUN” position.
The following tables list the settings that may be found
within the Uconnect 3 radio, along with the selectable
options pertaining to each setting.
Uconnect 3 Buttons On The Touchscreen And Buttons On
The Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
502
MULTIMEDIA
Display
After pressing the “Display” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Display Mode
Auto
Manual
Brightness
+
-
NOTE:
The “Brightness” setting can also be adjusted by selecting any point on the scale between the “+” and “-” buttons on
the touchscreen.
Language
English
Français
Español
NOTE:
Selecting any option within the “Language” setting will change the language for all displayed nomenclature, includ-
ing the trip functions and the navigation system (if equipped).
Touchscreen Beep
On
Off
10
MULTIMEDIA
503
Units
After pressing the “Units” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Units
US
Metric
Custom
NOTE:
• The “Metric” option changes the instrument cluster display to metric units of measure.
• The “Custom” option allows setting the “Fuel Consumption” (L/100km, or km/L) and “Pressure” (kPa, or bar)
units of measure independently.
Clock & Date
After pressing the “Clock & Date” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Set Time and Format
12 hour
24 hour
AM
PM
NOTE:
Within the “Set Time and Format” setting, press the corresponding arrow buttons on the touchscreen to adjust to the
correct time.
Show Time Status — If
Equipped
On
Off
Sync Time — If Equipped
On
Off
504
MULTIMEDIA
Safety/Assistance
After pressing the “Safety/Assistance” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
ParkView Backup Camera
Delay — If Equipped
On
Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.
ParkView Backup Camera
Active Guide Lines — If
Equipped
On
Off
NOTE:
The “ParkView Backup Camera Active Guide Lines” setting overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.
10
MULTIMEDIA
505
Setting Name
Selectable Options
ParkSense — If Equipped
Sound Only
Sound and Display
Rear ParkSense Volume — If
Equipped
Low
Medium
High
Blind Spot Alert — If
Equipped
Off
Lights
Lights and Chime
NOTE:
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged,
the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sen-
sor that is misaligned will result in the Blind Spot Monitor (BSM) not operating to specification.
Auto Park Brake
On
Off
506
MULTIMEDIA
Lights
After pressing the “Lights” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.
Automatic High Beam Head-
lamps — If Equipped
On
Off
Daytime Running Lights
Yes
No
Flash Lights With Lock — If
Equipped
On
Off
Interior Ambient Lights
+
-
NOTE:
The “Interior Ambient Lights” setting can also be adjusted by selecting any point on the scale between the “+” and
“-” buttons on the touchscreen.
10
MULTIMEDIA
507
Doors & Locks
After pressing the “Doors & Locks” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Auto Door Locks
On
Off
NOTE:
When this feature is selected, all doors will lock automatically when the vehicle reaches a speed of 12 mph (20 km/h).
Auto Unlock On Exit
On
Off
NOTE:
When this feature is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK
or NEUTRAL position and the driver’s door is opened.
Flash Lights With Lock
On
Off
Horn With Lock
On
Off
Horn With Remote Start — If
Equipped
On
Off
Remote Door Unlock/Door Unlock
Driver
All
NOTE:
When “Driver” is selected, only the driver’s door will unlock on the first push of the key fob unlock button, you must
push the key fob unlock button twice to unlock the passenger’s doors. When “All” is selected, all of the doors will unlock
on the first press of the key fob unlock button. If “All” is programmed, all doors will unlock no matter which Passive
Entry equipped door handle is grasped. If “Driver” is programmed, only the driver’s door will unlock when the driver’s
door is grasped. Touching the handle more than once will only result in the driver’s door opening once. If the driver’s
door is opened, the interior door lock/unlock switch can be used to unlock all doors (or use key fob).
508
MULTIMEDIA
Auto Comfort Systems — If Equipped
After pressing the “Auto-On Comfort Systems” button on
the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Auto-On Driver Heated/Ventilated Seat & Steering
Wheel With Vehicle Start — If Equipped
Off
Remote Start
All Starts
NOTE:
When this feature is selected, the driver’s heated seat and heated steering wheel will automatically turn on when
temperatures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C), the driver vented seat will turn
on.
Engine Off Options
After pressing the “Engine Off Options” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
NOTE:
When this feature is selected, it allows the adjustment of the amount of time the headlights remain on after the en-
gine is shut off.
10
MULTIMEDIA
509
Audio
After pressing the “Audio” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Equalizer
Bass
Mid
Treble
NOTE:
When in this display you may adjust the “Bass”, “Mid”, and “Treble” settings. Adjust the settings with the “+” and
“–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the
touchscreen. Bass/Mid/Treble also allow you to simply slide your finger up or down to change the setting as well as
press directly on the desired setting.
Balance/Fade
Up Arrow
Button
Down Arrow
Button
Left Arrow
Button
Right Ar-
row Button
Center “C”
Button
NOTE:
When in this display you may adjust the “Balance/Fade” of the audio by using the “Arrow” button on the touch-
screen to adjust the sound level from the front and rear or right and left side speakers. Press the “Center ‘C’ Button”
on the touchscreen to reset the balance and fade to the factory setting.
Speed Adjusted Volume
Off
1
2
3
Surround Sound — If Equipped
On
Off
Loudness
On
Off
NOTE:
The “Loudness” feature improves sound quality at lower volumes when enabled.
510
MULTIMEDIA
Setting Name
Selectable Options
AUX Volume Offset — If Equipped
+
-
NOTE:
The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through
the AUX input.
Phone/Bluetooth
After pressing the “Phone/Bluetooth” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Paired Phones
List of Paired Phones
NOTE:
This feature shows which phones are paired to the Phone/Bluetooth system. For further information, refer to the
Uconnect Owner’s Manual Supplement.
10
MULTIMEDIA
511
SiriusXM Setup — If Equipped
After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Channel Skip
List of Channels
NOTE:
SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude
undesirable channels while scanning. This feature allows you to select the channels you would like to skip.
Subscription Info
Sirius ID
NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the
screen or visit the provider online.
SiriusXM Travel Link is a separate subscription.
512
MULTIMEDIA
Restore Settings
After pressing the “Restore Settings” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Restore Settings
OK
Cancel
NOTE:
When the “Restore Settings” feature is selected, it will reset all settings to their default settings.
Clear Personal Data
After pressing the “Clear Personal Data” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Clear Personal Data
OK
Cancel
NOTE:
When the “Clear Personal Data” feature is selected it will remove all personal data including Bluetooth devices and
presets.
10
MULTIMEDIA
513
Customer Programmable Features — Uconnect 4
Settings
Press the “Settings” button on the bottom bar, or press the
“Apps
” button, then press the “Settings” button on
the touchscreen to display the menu setting screen. In
this mode the Uconnect system allows you to access all
of the available programmable features.
NOTE:
• Only one touchscreen area may be selected at a time.
• Depending on the vehicles options, feature settings may
vary.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting “option” until
a check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the Back Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on the
touchscreen to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the screen
will allow you to toggle up or down through the available
settings.
The following tables list the settings that may be found
within the Uconnect 4 with 7-inch display radio, along
with the selectable options pertaining to each setting.
Uconnect 4 With 7-inch Display Touchscreen and Faceplate
Buttons
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
514
MULTIMEDIA
Language
After pressing the “Language” button on the touchscreen,
the following settings will be available:
Setting Name
Selectable Options
Language
English
Espanol
Francais
Display
After pressing the “Display” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Display Mode
Auto
Manual
Display Brightness Headlights On
+
-
Display Brightness Headlights Off
+
-
AutoShow
On
Off
Touchscreen Beep
On
Off
Control Screen Timeout
On
Off
Phone Pop-ups Displayed in Cluster
On
Off
10
MULTIMEDIA
515
Units
After pressing the “Units” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Units
US
Metric
Custom
NOTE:
• The “Metric” option changes the instrument cluster display to metric units of measure.
• The “Custom” option allows setting the “Distance, Fuel Consumption” (MPG (US), MPG(UK), L/100km, or km/
L),“Pressure” (kPa, or bar) and “Temperature” (C, or F) units of measure independently.
Voice
After pressing the “Voice” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Voice Response Length
Brief
Detailed
Show Command List
Always
With Help
Never
516
MULTIMEDIA
Time & Date
After pressing the “Time & Date” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Set Time Hours
+
-
NOTE:
The “Set Time Hours” feature will allow you to adjust the hours.
Set Time Minutes
+
-
NOTE:
The “Set Time Minutes” feature will allow you to adjust the minutes.
Time Format
12hrs
24hrs
AM
PM
10
MULTIMEDIA
517
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст