Jeep Wrangler (2018 year). Manual — part 33
Camera
After pressing the “Camera” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
ParkView Backup Camera Delay —
If Equipped
On
Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.
ParkView Backup Camera Active
Guide Lines — If Equipped
On
Off
NOTE:
The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.
ParkView Backup Camera Fixed
Guide Lines — If Equipped
On
Off
518
MULTIMEDIA
Safety/Driving Assistance — If Equipped
After pressing the “Safety/Driving Assistance” button on
the touchscreen, the following settings will be available:
Setting Name
Selectable Options
ParkSense — If Equipped
Sound
Sound and Display
Rear ParkSense Volume
Low
Medium
High
Lights
After pressing the “Lights” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Interior Ambient Lights
+
-
NOTE:
The “Interior Ambient Lights” setting can also be adjusted by selecting any point on the scale between the “+” and
“-” buttons on the touchscreen.
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.
10
MULTIMEDIA
519
Setting Name
Selectable Options
Auto Dim High Beams — If
Equipped
On
Off
NOTE:
When the “Cornering Lights” feature is selected, if the steering wheel rotation angle is large or the turn signal indica-
tors are on, a light (incorporated in the fog light) will turn on, on the relevant side to improve visibility at night.
Flash Lights With Lock — If
Equipped
On
Off
Doors & Locks
After pressing the “Doors & Locks” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Auto Door Locks — If Equipped
On
Off
NOTE:
When this feature is selected, all doors will lock automatically when the vehicle reaches a speed of 12 mph
(20 km/h).
Auto Unlock On Exit
On
Off
NOTE:
When this feature is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK
or NEUTRAL position and the driver’s door is opened.
520
MULTIMEDIA
Setting Name
Selectable Options
Flash Lights With Lock
On
Off
Remote Door Unlock
Driver Door
All Doors
Personal Settings Linked To Key
Fob — If Equipped
On
Off
Engine Off Options — If Equipped
After pressing the “Engine Off Options” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Doors On Engine Off Power Delay
+
-
Doors Off Engine Off Power Delay
+
-
Headlight Off Delay
+
-
10
MULTIMEDIA
521
Aux Switches
After pressing the “Aux Switches” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Aux 1-4
Type
Latching
Momentary
Power Source
Battery
Ignition
Recalled Last State
NOTE:
Holding last state conditions are met when switch type is set to latching and power source is set to ignition.
Audio
After pressing the “Audio” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Balance & Fade
Speaker Icon
NOTE:
When in this display you may adjust the “Balance & Fade” of the audio by pressing and dragging the “Speaker Icon”
toward any location in the box.
522
MULTIMEDIA
Setting Name
Selectable Options
Equalizer
Bass
Mid
Treble
NOTE:
When in this display you may adjust the “Bass”, “Mid”, and “Treble” settings. Adjust the settings with the “+” and
“–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the
touchscreen. Bass/Mid/Treble also allow you to simply slide your finger up or down to change the setting as well as
press directly on the desired setting.
Speed Adjusted Volume
Off
1
2
3
Loudness
Yes
No
NOTE:
The “Loudness” feature improves sound quality at lower volumes when enabled.
AUX Volume Offset — If Equipped
+
-
NOTE:
This feature provides the ability to tune the audio level for portable devices connected through the AUX input.
Auto Play
On
Off
NOTE:
The “Auto Play” feature automatically starts playing audio when a USB device is connected and turned on.
10
MULTIMEDIA
523
Phone
After pressing the “Phone” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Do Not Disturb
Do Not Distrurb Options
Paired Phones And Audio Devices
List Of Paired Phones And Audio Devices
NOTE:
This feature shows which phones and audio devices are paired to the Phone/Bluetooth system. For further informa-
tion, refer to the Uconnect Owner’s Manual Supplement.
Phone Pop-ups Displayed In Cluster
On
Off
SiriusXM Setup — If Equipped
After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Channel Skip
List Of Channels
NOTE:
SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude
undesirable channels while scanning. This feature allows you to select the channels you would like to skip.
524
MULTIMEDIA
Setting Name
Selectable Options
Subscription Info
Sirius ID
NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the
screen or visit the provider online.
SiriusXM Travel Link is a separate subscription.
Restore Settings
After pressing the “Restore Settings” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Restore Settings
OK
Cancel
NOTE:
When this feature is selected it will reset all settings to their default settings.
10
MULTIMEDIA
525
Clear Personal Data
After pressing the “Clear Personal Data” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Clear Personal Data
OK
Cancel
NOTE:
When this feature is selected it will remove all personal data including Bluetooth devices and presets.
526
MULTIMEDIA
Customer Programmable Features — Uconnect
4/4C NAV Settings
Press the “Apps
” button, then press the “Settings
” button on the touchscreen to display the menu
setting screen. In this mode the Uconnect system allows
you to access all of the available programmable features.
NOTE:
• Only one touchscreen area may be selected at a time.
• Depending on the vehicles options, feature settings may
vary.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting “option” until
a check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the Back Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on the
touchscreen to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the screen
will allow you to toggle up or down through the available
settings.
The following tables list the settings that may be found
within the Uconnect 4/4C NAV radio, along with the
selectable options pertaining to each setting.
Uconnect 4/4C NAV Touchscreen and Faceplate Buttons
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
10
MULTIMEDIA
527
Display
After pressing the “Display” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Display Mode
Manual
Auto
Display Brightness With Headlights
ON
+
-
NOTE:
To make changes to the
⬙Display Brightness with Headlights ON⬙ setting, the headlights must be on and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
Display Brightness With Headlights
OFF
On
Off
NOTE:
To make changes to the
⬙Display Brightness with Headlights OFF⬙ setting, the headlights must be off and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
Set Theme
On
Off
NOTE:
When in this display, you may select the theme for the display screen. To make your selection, press the
⬙Set Theme⬙
button on the touchscreen, then select the desired theme option button until a check-mark appears showing that the
setting has been selected.
528
MULTIMEDIA
Setting Name
Selectable Options
Set Language
On
Off
NOTE:
When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Espa-
ñol) for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set
Language” button on the touchscreen, then press the desired language button on the touchscreen until a check-mark
appears next to the language, showing that setting has been selected.
Touchscreen Beep
On
Off
Control Screen Time-Out
On
Off
NOTE:
When the “Control Screen Time-Out” feature is selected, the Controls Screen will stay open for five seconds before
the screen times out. With the feature deselected, the screen will stay open until it is manually closed.
Navigation Turn-By-Turn In Cluster
On
Off
NOTE:
When the “Navigation Turn-By-Turn In Cluster” feature is selected, the turn-by-turn directions will appear in the In-
strument Cluster Display as the vehicle approaches a designated turn within a programmed route.
10
MULTIMEDIA
529
Units
After pressing the “Units” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Units
US
Metric
Custom
NOTE:
• The “Metric” option changes the instrument cluster display to metric units of measure.
• The “Custom” option allows setting the “Fuel Consumption” (L/100km, or km/L), “Pressure” (kPa, or bar), and
“Temperature” (°C or °F) units of measure independently.
Voice
After pressing the “Voice” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Voice Response Length
Brief
Detailed
Show Command List
Always
With Help
Never
530
MULTIMEDIA
Clock
After pressing the “Clock” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Sync Time With GPS — If Equipped
On
Off
Set Time Hours
+
-
NOTE:
The “Set Time Hours” feature will allow you to adjust the hours. The “Sync time with GPS” button on the touch-
screen must be unchecked.
Set Time Minutes
+
-
NOTE:
The “Set Time Minutes” feature will allow you to adjust the minutes. The “Sync time with GPS” button on the touch-
screen must be unchecked.
Time Format
12hrs
24hrs
Show Time in Status Bar — If Equipped
On
Off
10
MULTIMEDIA
531
Camera
After pressing the “Camera” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
ParkView Backup Camera Delay —
If Equipped
On
Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.
ParkView Backup Camera Active
Guide Lines — If Equipped
On
Off
NOTE:
The “ParkView Backup Camera Active Guide Lines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.
ParkView Backup Camera Fixed
Guide Lines — If Equipped
On
Off
532
MULTIMEDIA
Safety & Driving Assistance
After pressing the “Safety & Driving Assistance” button on
the touchscreen, the following settings will be available:
Setting Name
Selectable Options
ParkSense — If Equipped
Sound Only
Sound and Display
Rear ParkSense Volume
Low
Medium
High
Blind Spot Alert — If Equipped
Off
Lights
Lights & Chime
NOTE:
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged,
the sensor may have become misaligned. Take your vehicle to your authorized dealer to verify sensor alignment. A
sensor that is misaligned will result in the BSM not operating to specification.
Mirror and Wipers
After pressing the “Mirror and Wipers” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Headlights with Wipers —
If Equipped
On
Off
10
MULTIMEDIA
533
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст