Jeep Wrangler (2018 year). Manual — part 35

A third and fourth USB Ports are located behind the center

console, above the Power Inverter. One is a charge only

port, and can only charge USB devices. The other USB Port

allows you to play music from iPod/MP3 players or USB

devices through your vehicle’s sound system.

Center Console USB

USB On The Back Of The Center Console

1 — Type C And Standard USB Ports
2 — Type C And Standard Charge Only USB Ports

550

MULTIMEDIA

Device Plugged In Message Screen

Phone Plugged In Message Screen

10

MULTIMEDIA

551

NOTE:

Plugging in a phone or another USB device may

cause the connection to a previous device to be lost.

WARNING!

Do not plug in or remove the iPod or external device
while driving. Failure to follow this warning could
result in a collision.

RADIO OPERATION AND MOBILE PHONES

Under certain conditions, the mobile phone being on in

your vehicle can cause erratic or noisy performance from

your radio. This condition may be lessened or eliminated

by relocating the mobile phone antenna. This condition is

not harmful to the radio. If your radio performance does

not satisfactorily “clear” by the repositioning of the an-

tenna, it is recommended that the radio volume be turned

down or off during mobile phone operation when not

using Uconnect (if equipped).

Regulatory And Safety Information

USA/CANADA

Exposure to Radio Frequency Radiation
The radiated output power of the internal wireless radio is

far below the FCC and IC radio frequency exposure limits.

Nevertheless, the wireless radio will be used in such a

manner that the radio is 20 cm or further from the human

body.
The internal wireless radio operates within guidelines

found in radio frequency safety standards and recommen-

dations, which reflect the consensus of the scientific com-

munity.

Phone or USB Plugged In Message Screen

552

MULTIMEDIA

The radio manufacturer believes the internal wireless radio

is safe for use by consumers. The level of energy emitted is

far less than the electromagnetic energy emitted by wire-

less devices such as mobile phones. However, the use of

wireless radios may be restricted in some situations or

environments, such as aboard airplanes. If you are unsure

of restrictions, you are encouraged to ask for authorization

before turning on the wireless radio.
The following regulatory statement applies to all Radio

Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and

with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, in-

cluding interference that may cause undesired opera-

tion.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE:
• This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interfer-

ence will not occur in a particular installation.

• If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of

the following measures:

1. Increase the separation between the equipment and

receiver.

2. Consult an authorized dealer or an experienced radio

technician for help.

10

MULTIMEDIA

553

UCONNECT VOICE RECOGNITION QUICK TIPS

Introducing Uconnect

Start using Uconnect Voice Recognition with these helpful

quick tips. It provides the key Voice Commands and tips

you need to know to control your Uconnect 3, Uconnect 4,

or Uconnect 4/4C NAV system.

Uconnect 3 With 5–inch Display

Uconnect 4

554

MULTIMEDIA

If you see the NAV icon on the bottom bar, or in the Apps

menus, of your 8.4-inch touchscreen, you have the

Uconnect 4C NAV system. If not, you have a Uconnect 4

with 8.4-inch display system.

Get Started

All you need to control your Uconnect system with your

voice are the buttons on your steering wheel.
1. Visit UconnectPhone.com to check mobile device and

feature compatibility and to find phone pairing instruc-

tions.

2. Reduce background noise. Wind and passenger conver-

sations are examples of noise that may impact recogni-

tion.

3. Speak clearly at a normal pace and volume while facing

straight ahead. The microphone is positioned on the

rearview mirror and aimed at the driver.

4. Each time you give a Voice Command, you must first

push either the Voice Recognition (VR) or Phone button,

wait until after the beep, then say your Voice Command.

Uconnect 4/4C NAV

10

MULTIMEDIA

555

5. You can interrupt the help message or system prompts

by pushing the VR or Phone button and saying a Voice

Command from current category.

Basic Voice Commands

The basic Voice Commands below can be given at any

point while using your Uconnect system.
Push the VR button

. After the beep, say:

• “ Cancel” to stop a current voice session
• “ Help” to hear a list of suggested Voice Commands
• “ Repeat” to listen to the system prompts again
Notice the visual cues that inform you of your voice

recognition system’s status. Cues appear on the touch-

screen.

Radio

Use your voice to quickly get to the AM, FM or SiriusXM

Satellite Radio stations you would like to hear. (Subscrip-

tion or included SiriusXM Satellite Radio trial required.)
Push the VR button

. After the beep, say:

• “ Tune to ninety-five-point-five FM”
• “ Tune to Satellite Channel Hits 1”

Uconnect Voice Command Buttons — If Equipped

1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive
A Text
2 — For All Radios: Push To Begin Radio Or Media Functions. For
8.4-inch Displays Only: Push To Begin Navigation, Apps And Cli-
mate Functions.
3 — Push To End Call

556

MULTIMEDIA

TIP:

At any time, if you are not sure of what to say or want

to learn a Voice Command, push the VR button

and say

“ Help.” The system provides you with a list of com-

mands.

Uconnect 3 Radio

Uconnect 4 Radio

10

MULTIMEDIA

557

Media

Uconnect offers connections via USB, Bluetooth and auxil-

iary ports (If Equipped). Voice operation is only available

for connected USB and AUX devices. (Remote CD player

optional and not available on all vehicles.)
Push the VR button

. After the beep, say one of the

following commands and follow the prompts to switch

your media source or choose an artist.
• “ Change source to Bluetooth”
• “ Change source to AUX”
• “ Change source to USB”
• “ Play artist Beethoven”; “ Play album Greatest Hits”; “

Play song

Moonlight Sonata”; “ Play genre Classical”

TIP:

Press the Browse button on the touchscreen to see all

of the music on your USB device. Your Voice Command

must match exactly how the artist, album, song and genre

information is displayed.

Uconnect 4/4C NAV Radio

558

MULTIMEDIA

Uconnect 3 Media

Uconnect 4 Media

10

MULTIMEDIA

559

Phone

Making and answering hands-free phone calls is easy with

Uconnect. When the Phonebook button is illuminated on

your touchscreen, your system is ready. Check

UconnectPhone.com for mobile phone compatibility and

pairing instructions.
Push the VR button

and the Phone button. After the

beep, say one of the following commands:
• “ Call John Smith”
• “ Dial 123-456-7890 and follow the system prompts”
• “ Redial (call previous outgoing phone number)”
• “ Call back (call previous incoming phone number)”

TIP:

When providing a Voice Command, push the VR

button

and the Phone button and say “ Call,” then

pronounce the name exactly as it appears in your phone

book. When a contact has multiple phone numbers, you

can say “ Call John Smith work.”

Uconnect 4/4C NAV Media

560

MULTIMEDIA

Uconnect 3 Phone

Uconnect 4 Phone

10

MULTIMEDIA

561

Voice Text Reply

Uconnect announces incoming text messages. Push the

Phone button

and say “ Listen.” (Must have compat-

ible mobile phone paired to Uconnect system.)
1. Once an incoming text message is read to you, push the

Phone button

. After the beep, say: “ Reply.”

2. Listen to the Uconnect prompts. After the beep, repeat

one of the pre-defined messages and follow the system

prompts.

PRE-DEFINED VOICE TEXT REPLY RESPONSES

Yes.

Stuck in traffic.

See you later.

No.

Start without

me.

I’ll be late.

Okay.

Where are you?

I will be

<number>

minutes late.

Call me.

Are you there

yet?

I’ll call you later.

I need

directions.

See you in

<number> of

minutes.

I’m on my way.

Can’t talk right

now.

I’m lost.

Thanks.

Uconnect 4/4C NAV Phone

562

MULTIMEDIA

TIP:

Your mobile phone must have the full implementation

of the Message Access Profile (MAP) to take advantage of

this

feature.

For

details

about

MAP,

visit

UconnectPhone.com.
Apple iPhone iOS 6 or later supports reading incoming

text messages only. To enable this feature on your Apple

iPhone, follow these four simple steps:

TIP:

Voice Text Reply is not compatible with iPhone, but if

your vehicle is equipped with Siri Eyes Free, you can use

your voice to send a text message.

Climate

Too hot? Too cold? Adjust vehicle temperatures hands-free

and keep everyone comfortable while you keep moving

ahead. (If vehicle is equipped with climate control.)
Push the VR button

. After the beep, say one of the

following commands:
• “ Set driver temperature to 70 degrees”
• “ Set passenger temperature to 70 degrees”

TIP:

Voice Command for Climate may only be used to

adjust the interior temperature of your vehicle. Voice

Command will not work to adjust the heated seats or

steering wheel if equipped.

iPhone Notification Settings

1 — Select “Settings”
2 — Select “Bluetooth”
3 — Select The (i) For The Paired Vehicle
4 — Turn On “Show Notifications”

10

MULTIMEDIA

563

Uconnect 4 Climate

Uconnect 4/4C NAV Climate

564

MULTIMEDIA

Navigation (4C NAV)

The Uconnect navigation feature helps you save time and

become more productive when you know exactly how to

get to where you want to go.
1. To enter a destination, push the VR button

. After the

beep, say: “ Find address 800 Chrysler Drive Auburn

Hills, Michigan.”

2. Then follow the system prompts.

TIP:

To start a POI search, push the VR button

. After

the beep, say: “ Find nearest coffee shop.”

SiriusXM Guardian (4C/4C NAV)— If Equipped

CAUTION!

Some SiriusXM Guardian services, including SOS Call
and Roadside Assistance Call will NOT work without
an operable LTE (voice/data) or 3G or 4G (data) net-
work connection compatible with your device.

Uconnect 4C NAV Navigation

10

MULTIMEDIA

565