Jeep Cherokee (2019 year). Manual — part 35

Setting Name

Selectable Options

Forward Collision Warn-

ing — If Equipped

Off

Warning Only

Warning & Braking

NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in
front of you.
The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, it will re-
main off when the vehicle is restarted.
Forward Collision Warning includes Advanced Brake Assist (ABA). The ABA applies additional brake pressure when
the driver requests insufficient brake pressure to avoid a potential frontal collision. When the “Sound Only” option is
selected a chime will sound alerting you of a possible collision with the vehicle in front of you and more brake pres-
sure is needed. When the “Sound and Brake” option is selected, it will apply the brakes to slow your vehicle in case
of potential forward collision and sound an audible chime to alert you.

Forward Collision Warn-

ing Sensitivity — If

Equipped

Far

Med

Near

NOTE:
The “Forward Collision Warning Sensitivity” setting determines at what relative distance the vehicle directly in front
of you needs to be at, before the system will warn you of a possible collision with the vehicle directly in front of you,
based on the option is selected. “Far” will give you the most amount of reaction time, whereas “Near” will give you
the least amount of reaction time, based on the distance between the two vehicles.

548

MULTIMEDIA

Setting Name

Selectable Options

Front ParkSense Volume

Low

Medium

High

Lane Departure Warning

(LDW) — If Equipped

Early

Medium

Late

NOTE:
The “Lane Depature Warning (LDW)” setting determines at what distance the LDW system will warn you, through
steering wheel feedback, of a possible lane departure.

Lane Departure Strength

(LDW) — If Equipped

Low

Medium

High

Rain Sensing Auto Wipers

Paddle Shifters

Enable

Disable

Steering Feel Options

Sport

Normal

Comfort

NOTE:
The “Steering Feel Options” setting allows you to adjust the steering effort and feel. Press the “Comfort” button on
the touchscreen to provide a balance of steering feel and steering effort. Press the “Normal” button on the touch-
screen to provide greater steering feel, requiring greater steering effort. Press the “Sport” button on the touchscreen to
provide the greatest amount of steering feel, requiring the highest amount of steering effort.

10

MULTIMEDIA

549

Brakes

After pressing the “Brakes” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Auto Park Brake

Brake Service

Yes

No

NOTE:
Selecting the “Brake Service” feature will display a pop-up asking whether you would like to retract the park brakes
to allow brake system service.

Lights

After pressing the “Lights” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Headlight Off Delay

0 sec

30 sec

60 sec

90 sec

NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.

550

MULTIMEDIA

Setting Name

Selectable Options

Headlight Illumination On

Approach

0 sec

30 sec

60 sec

90 sec

NOTE:
When this feature is selected, it allows the adjustment of the amount of time the headlights remain on after the doors
are unlocked with the key fob.

Headlights With Wipers — If

Equipped

On

Off

Auto High Beam — If Equipped

On

Off

NOTE:
When the “Auto High Beams” is selected, the high beam headlights will activate/deactivate automatically under cer-
tain conditions.

Daytime Running Lights

On

Off

Flash Lights With Lock

On

Off

10

MULTIMEDIA

551

Doors & Locks

After pressing the “Doors & Locks” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Auto Unlock On Exit

On

Off

NOTE:
When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped and the trans-
mission is in the PARK or NEUTRAL position and the driver’s door is opened.

Flash Lights With Lock

On

Off

Sound Horn With Lock

Off

1st Press

2nd Press

Sound Horn With Remote

Start — If Equipped

On

Off

Remote Door Unlock

Driver Door

All Doors

NOTE:
When “Driver” is selected, only the driver’s door will unlock on the first push of the key fob unlock button, you
must push the key fob unlock button twice to unlock the passenger’s doors. When “All” is selected, all of the doors
will unlock on the first press of the key fob unlock button. If “All” is programmed, all doors will unlock no matter
which Passive Entry equipped door handle is grasped. If “Driver” is programmed, only the driver’s door will unlock
when the driver’s door is grasped. Touching the handle more than once will only result in the driver’s door opening
once. If the driver’s door is opened, the interior door lock/unlock switch can be used to unlock all doors (or use key
fob).

552

MULTIMEDIA

Setting Name

Selectable Options

Passive Entry

On

Off

Memory Linked To FOB

— If Equipped

On

Off

NOTE:
The “Memory Linked To FOB” feature provides automatic recall of all settings stored to a memory location (driver’s
seat, exterior mirrors, steering column position and radio station pre-sets) to enhance driver mobility when entering
and exiting the vehicle.

Power Liftgate Alert — If

Equipped

On

Off

NOTE:
The “Power Liftgate Alert” feature plays an alert when the power liftgate is raising or lowering.

10

MULTIMEDIA

553

Auto-On Comfort — If Equipped

After pressing the “Auto-On Comfort & Remote Start”
button on the touchscreen, the following settings will be
available:

Setting Name

Selectable Options

Auto-On Driver Heated

Seat & Steering Wheel —

If Equipped

Off

Remote Start

All Starts

NOTE:
When this feature is selected, the driver’s heated seat and heated steering wheel will automatically turn ON when tem-
peratures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C), the driver vented seat will turn ON.

Engine Off Options

After pressing the “Engine Off Options” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Engine Off Power Delay — If

Equipped

0 sec

45 sec

5 min

10 min

NOTE:
When the “Engine Off Power Delay” feature is selected, the power window switches, radio, Uconnect Phone system
(if equipped), power sunroof (if equipped), and power outlets will remain active for up to ten minutes after the igni-
tion is cycled to OFF. Opening either front door will cancel this feature.

554

MULTIMEDIA

Setting Name

Selectable Options

Headlight Off Delay

0 sec

30 sec

60 sec

90 sec

NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.

Easy Exit Seat — If Equipped

NOTE:
When the “Easy Exit Seat” feature is selected, it provides automatic driver seat positioning to enhance driver mobility
when entering and exiting the vehicle.

Auto Entry/Exit If Equipped

On

Off

NOTE:
The “Auto Entry/Exit feature automatically lowers the vehicle ride height position when shifted into park, when it is
selected.

10

MULTIMEDIA

555

Compass Settings — If Equipped

After pressing the “Compass Settings” button on the
touchscreen, the following settings will be available:

NOTE:

Before compass calibration is performed, the com-

pass variance zone should be set for best results.

Setting Name

Selectable Options

Compass Variance

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

When the “Compass Variance” feature is selected, it allows the compass variance to be set to any number from 1 to
15 per the compass variance zone map figure.
Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differ-
ences, the variance should be set for the zone where the vehicle is being driven, illustrated in the zone map. Once
properly set, the compass will automatically compensate for the differences when calibrated, and provide the most
accurate compass headings.

Compass Variance Zone Map

556

MULTIMEDIA

Compass Calibration

Start

NOTE:
Press “Compass Calibration” on the touchscreen to enter calibration. To start calibration of the compass, press the
“Yes” button on the touchscreen and complete one or more 360-degree turns (in an area free from large metal or me-
tallic objects). A message will appear on the touchscreen when the compass has been successfully calibrated.
Keep magnetic materials away from the rear view mirror, such as Mobile Phones, Laptops and Radar Detectors. This
is where the compass module is located, and it can cause interference with the compass sensor, and it may give false
readings.

Audio

After pressing the “Audio” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Balance/Fade

Up Arrow

Button

Down Ar-

row Button

Left Arrow

Button

Right Ar-

row Button

Center “C”

Button

NOTE:
When in this display you may adjust the “Balance/Fade” of the audio by using the “Arrow” button on the touch-
screen to adjust the sound level from the front and rear or right and left side speakers. Press the “Center ‘C’ Button”
on the touchscreen to reset the balance and fade to the factory setting.

10

MULTIMEDIA

557

Setting Name

Selectable Options

Equalizer

Bass

Mid

Treble

NOTE:
When in this display you may adjust the “Bass”, “Mid”, and “Treble” settings. Adjust the settings with the “+” and
“–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the
touchscreen. Bass/Mid/Treble also allow you to simply slide your finger up or down to change the setting as well as
press directly on the desired setting.

Speed Adjusted Volume

Off

1

2

3

Surround Sound — If Equipped

On

Off

Auto Play

On

Off

NOTE:
When selecting the “Auto Play” sub setting, a message will pop up stating “USB devices will automatically play me-
dia when AutoPlay is turned On.”

Loudness — If Equipped

Yes

No

NOTE:
This feature improves sound quality at lower volumes when enabled.

AUX Volume Offset — If Equipped

-3

+3

NOTE:
This feature provides the ability to tune the audio level for portable devices connected through the AUX input.

558

MULTIMEDIA

Phone/Bluetooth

After pressing the “Phone/Bluetooth” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Do Not Disturb

List of Settings

NOTE:
Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto
Reply Message (custom, default) and Custom Auto Reply Message (create message).

Paired Phones And Audio Devices

List of Paired Phones

NOTE:
The “Paired Phones and Audio Devices” feature shows which phones and audio devices are paired to the Phone/
Bluetooth system. For further information, refer to the Uconnect Owner’s Manual Supplement.

Display Phone Info In Cluster

Off

On

10

MULTIMEDIA

559

Suspension — If Equipped

After pressing the “Suspension” button on the touchscreen,
the following settings will be available:

Setting Name

Selectable Options

Auto Entry/Exit Suspension

On

Off

NOTE:
When the “Auto Entry/Exit Suspension” setting is selected, the vehicle automatically lowers from ride height posi-
tion when the vehicle is shifted to park for easy entry/exit.

Display Suspension Messages

All

Warnings Only

NOTE:
The “Suspension Display Messages” setting allows you to choose whether you want the Suspension system to display
all suspension messages, or to only display suspension warnings.

Tire Jack Mode

On

Off

NOTE:
When the “Tire Jack Mode” setting is selected, the air suspension system is disabled to prevent auto leveling of the
suspension while the vehicle is on a jack, changing a tire.

Transport Mode

On

Off

NOTE:
When the “Transport Mode” setting is selected, the air suspension system is disabled to assist with flat bed towing.

560

MULTIMEDIA

Setting Name

Selectable Options

Wheel Alignment Mode

On

Off

NOTE:
The “Wheel Alignment Mode” setting prevents auto leveling of the air suspension while performing a wheel align-
ment service.

SiriusXM Setup — If Equipped

After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Tune Start

NOTE:
The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using
one of the twelve presets, so you can enjoy the complete song. This feature occurs the first time the preset is selected
during that current song. Tune Start works in the background, so you will not even realize it’s on, except that you
will miss the experience of joining your favorite song with only a few seconds left to play.

Channel Skip

List of Channels

NOTE:
SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude
undesirable channels while scanning. This feature allows you to select the channels you would like to skip.

10

MULTIMEDIA

561

Setting Name

Selectable Options

Subscription Info

Sirius ID

NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.

1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.

2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the

screen or visit the provider online.

Radio Setup — If Equipped

After pressing the “Radio Setup” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Regional — If Equipped

On

Off

NOTE:
When the “Regional” feature is selected, it forces regional service-following enabling automatic switching to network
stations.

562

MULTIMEDIA

Restore Settings

After pressing the “Restore Settings” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Restore Settings

OK

Cancel

NOTE:
When this feature is selected, it will reset all settings to their default settings.

Clear Personal Data

After pressing the “Clear Personal Data” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Clear Personal Data

OK

Cancel

NOTE:
When the “Clear Personal Data” feature is selected, it will remove all personal data including Bluetooth devices and
presets.

10

MULTIMEDIA

563