Kia Carnival (2009+). Instruction — part 295

17. Disconnect the power steering pressure hose (A) from the power steering oil pump. (see ST group)

18. Drain the tranaxle fluid through the drain plug.

19. Remove the hanger(A).

20. Disconnect the lower arm, the tie rod end ball joint, the stabilizer bar link from the front knuckle. (see SS group)

21. Remove the roll stopper mounting bolt(A).

22. Remove the power steering return tube mounting bolt(A)

23. Remove the rear roll stopper mounting bolts(A).

24. Disconnect the VRS connector(A). (see ST group)

25. Remove the mounting bolts from the sub frame by supporting the sub frame(A) with a jack. (see SS group)

26. Remove the exhaust pipe(A).

27. Remove the inner shaft bracket mounting bolt(A). RH

28. Remove the drive shafts(A) from the transaxle. (see DS group)

29. Remove the side cover(A).

30. Remove the starter motor cover(A).

31. Disconnect the starter motor connector and remove the starter motor(A). (see EE group)

32. Remove the mounting bolts(A) of lower part of the transaxle, and remove the transaxle assembly by supporting it

with a jack.

INSTALLATION

1. Lowering the vehicle or lifting up a jack, install the transaxle assembly.