Kia Carnival (2009+). Instruction — part 296

2. Tighten the transaxle under mounting bolts.

TORQUE:
65~85 Nm(6.5~8.5 kgf.m, 47.0~61.5 lb-ft)

3. Install the starter motor(A) and connect the starter motor connector. (see EE group)

TORQUE:
65~85 Nm(6.5~8.5 kgf.m, 47.0~61.5 lb-ft)

4. install the starter motor cover(A).

5. install the side cover(A).

6. Install the drive shafts(A) to the transaxle. (see DS group)

7. Install the inner shaft bracket mounting bolt(A). (see DS group)

8. Install the exhaust pipe(A).

TORQUE:
39.2~58.8Nm(4.0~6.0kgf.m, 28.9~43.4lb-ft)

9. Install the sub frame(A). (see SS group)

TORQUE:
60~80Nm(6.0~8.0kgf.m, 65.1~79.5lb-ft)

10. Connect the vrs connector(A). (see ST group)

11. Install the rear roll stopper mounting bolts(A).

12. Install the power steering return tube mounting bolt(A).

13. Install the front roll stopper mounting bolt(A).

14. Connect the lower arm, the rod end ball joint, the stabilizer bar link to the front knuckle.(see SS group)

15. Install the hanger(A).

16. Refill the transaxle with fluid.

17. Connect the power steering pressure hose (A) to the power steering oil pump.

18. Connect the power steering return hose(A). (see ST group)