Kia Carnival (2009+). Instruction — part 318
2009 > G 2.7 DOHC >
REPLACEMENT
1. Remove the battery and air cleaner. (see "Transaxle range switch replacement")
2. Remove the output shaft speed sensor(A).
(1) Disconnect the output shaft speed sensor connector(B).
(2) Remove the bolt(C).
(3) Inspect the output shaft speed sensor bore.
3. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
4. Installation is the reverse of removal.
Automatic Transaxle System
Automatic Transaxle Control System -
Transaxle Oil Temperature Sensor
Automatic Transaxle System
2009 > G 2.7 DOHC >
DESCRIPTION
Oil Temperature Sensor
The oil temperature sensor is of the thermistor type, and senses the automatic transaxle fluid temperature. Using the
signal from this sensor, TCM(PCM) controls the shift pattern optimally during shift. In order to operate the damper
clutch, this signal is also referred.
- Range of temperature : -40°C~145°C
- Type: Separated type (High / Low temperature)
- Standard value of internal resistance
Temp.[°C(°F)]
Resistance(k!)
Temp.[°C(°F)]
Resistance(k!)
-40(-40)
139.5
80(176)
1.08
-20(-4)
47.7
100(212)
0.63
0(32)
18.6
120(248)
0.38
20(68)
8.1
140(284)
0.25
40(104)
3.8
160(320)
0.16
60(140)
1.98
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст