Kia Sedona (2008 year). Instruction — part 59
Fig. 33: Checking BPT Resistance
3. Is the measured resistance within specification?
YES
Replace the Seat Belt Pretensioner (BPT) module.
NO
Check open circuit.
3. CHECK OPEN CIRCUIT
1. Measure resistance between the terminal 2 of BPT harness connector and the terminal 3 (2) of
SRSCM harness connector (B).
2. Measure resistance between the terminal 1 of BPT harness connector and the terminal 4 (1) of
SRSCM harness connector (B).
Specification (resistance): below 1 ohms
Fig. 34: Checking Open Circuit
3. Is the measured resistance within specification?
YES
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:01 PM
Page 39
© 2006 Mitchell Repair Information Company, LLC.
Check short circuit.
NO
Repair or replace the wiring harness between the BPT and the SRSCM.
4. CHECK SHORT CIRCUIT
1. Measure resistance between the terminal 1 and 2 of BPT harness connector.
Specification (resistance): infinite
Fig. 35: Checking Short Circuit
2. Is the measured resistance within specification?
YES
Go to next step.
NO
Repair or replace the wiring harness between the BPT and the SRSCM.
5. CLEAR THE DTC AND CHECK THE VEHICLE AGAIN
Refer to CLEAR THE DTC AND CHECK THE VEHICLE AGAIN.
DTC B1363 SEAT BELT PRETENSIONER [FRONT-DRIVER] CIRCUIT SHORT TO GROUND;
DTC B1369 SEAT BELT PRETENSIONER [FRONT-PASSENGER] CIRCUIT SHORT TO GROUND
DTC DESCRIPTION
The Seat Belt Pretensioner consists of the SRSCM and two Seat Belt Pretensioners (BPT). The SRSCM sets
above DTC (s) if it detects short to ground on the BPT circuit.
DTC DETECTING CONDITION
DTC DETECTING CONDITION
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:01 PM
Page 40
© 2006 Mitchell Repair Information Company, LLC.
SCHEMATIC DIAGRAM
Fig. 36: Seat Belt Pretensioner - Schematic Diagram
TERMINAL & CONNECTOR INSPECTION
Refer to TERMINAL & CONNECTOR INSPECTION.
INSPECTION PROCEDURE
1. PREPARATION
Refer to PREPARATION OF INSPECTION.
2. CHECK SHORT TO GROUND
1. Measure resistance between the terminal 2 of BPT harness connector and chassis ground.
Specification (resistance): infinite
DTC
Condition
Probable cause
B1363
B1369
Short to ground between BPT and SRSCM
Seat Belt Pretensioner (BPT) Malfunction
SRSCM Malfunction
Short to ground circuit on wiring harness
Seat Belt Pretensioner (BPT) squib
SRSCM
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:01 PM
Page 41
© 2006 Mitchell Repair Information Company, LLC.
Fig. 37: Checking Short To Ground
2. Is the measured resistance within specification?
YES
Check the BPT Module.
NO
Repair or replace the wiring harness between the BPT and the SRSCM.
3. CHECK THE BPT MODULE
1. Replace the Belt Pretensioner (BPT) with a new one.
Refer to SEAT BELT PRETENSIONER .
2. Install the DAB module and connect the DAB connector.
3. Connect the connectors of the PAB, SAB, CAB, BPT, FIS and SIS.
4. Connect the SRSCM connector.
5. Connect the battery negative cable to the battery.
6. Connect a Hi-Scan (Pro) to the data link connector.
7. Turn the ignition switch to ON and check the vehicle again.
Does Hi-Scan (Pro) indicate any DTC related to Belt Pretensioner (BPT)?
YES
Go to next step.
NO
Replace BPT module.
4. CLEAR THE DTC AND CHECK THE VEHICLE AGAIN
Refer to CLEAR THE DTC AND CHECK THE VEHICLE AGAIN.
2008 Kia Sedona EX
2008 RESTRAINTS Troubleshooting (Airbag) - Sedona
Microsoft
Monday, May 24, 2010 3:55:01 PM
Page 42
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст