Kia Sedona (2008 year). Instruction — part 454
KEYLESS ENTRY SYSTEM
The keyless entry system uses a hand-held transmitter and IPM-mounted receiver to control door locks, alarm
functions, Power Tail Gate (PTG) and Power Sliding Doors (PSD).
SPECIFICATION
KEYLESS ENTRY SYSTEM SPECIFICATION
INSPECTION
FRONT DOOR LOCK ACTUATOR
1. Remove the front door trim panel. Refer to FRONT DOOR .
2. Disconnect the 4P connector from the actuator.
NOTE:
The receiver of the keyless entry system are built-in the IPM (In-Panel Module).
Items
Specifications
Keyless entry transmitter Power source
Lithium 3V battery (1EA)
Transmissible distance
30 m or more
Life of battery
2 years or more (at 10 times per day)
Button
Door lock/unlock
PSD (Power Sliding Door) open/close (option)
PTG (Power Tail Gate) open/close (option)
Panic
Tailgate open (option)
Transmission frequency
315.00 MHz
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona
Microsoft
Monday, May 24, 2010 4:17:42 PM
Page 2
© 2006 Mitchell Repair Information Company, LLC.
Fig. 2: Identifying Front Door Lock Actuator 4P Connector
Courtesy of KIA MOTORS AMERICA, INC.
3. Check actuator operation by connecting power and ground. See Fig. 3. To prevent damage to the actuator,
apply battery voltage only momentarily.
Fig. 3: Testing Front Door lock Actuator
Courtesy of KIA MOTORS AMERICA, INC.
SLIDING DOOR LOCK ACTUATOR
1. Remove the sliding door trim panel. Refer to REAR DOOR .
2. Disconnect the 6P connector from the actuator.
Fig. 4: Identifying Sliding Door Lock Actuator 6P Connector
Courtesy of KIA MOTORS AMERICA, INC.
3. Check actuator operation by connecting power and ground. See Fig. 5. To prevent damage to the actuator,
apply battery voltage only momentarily.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona
Microsoft
Monday, May 24, 2010 4:17:42 PM
Page 3
© 2006 Mitchell Repair Information Company, LLC.
Fig. 5: Testing Sliding Door Lock Actuator
Courtesy of KIA MOTORS AMERICA, INC.
TAILGATE LOCK ACTUATOR (5DOORS)
1. Remove the tailgate trim panel. Refer to TAILGATE .
2. Disconnect the 6P connector from the actuator.
Fig. 6: Identifying Tailgate Lock Actuator 6P Connector
Courtesy of KIA MOTORS AMERICA, INC.
3. Check actuator operation by connecting power and ground according. See Fig. 7. To prevent damage to
the actuator, apply battery voltage only momentarily.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona
Microsoft
Monday, May 24, 2010 4:17:42 PM
Page 4
© 2006 Mitchell Repair Information Company, LLC.
Fig. 7: Testing Tailgate Lock Actuator
Courtesy of KIA MOTORS AMERICA, INC.
FRONT DOOR LOCK SWITCH
1. Remove the front door trim panel. Refer to FRONT DOOR .
2. Disconnect the 4P connector from the actuator.
Fig. 8: Identifying Front Door Lock Actuator 4P Connector
Courtesy of KIA MOTORS AMERICA, INC.
3. Check for continuity between the terminals in each switch position. See Fig. 9.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona
Microsoft
Monday, May 24, 2010 4:17:42 PM
Page 5
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст