Kia Sedona (2008 year). Instruction — part 455

Fig. 9: Testing Front Door Lock Actuator
Courtesy of KIA MOTORS AMERICA, INC.

SLIDING DOOR LOCK SWITCH

1. Remove the sliding door trim panel. Refer to REAR DOOR .

2. Disconnect the 6P connector from the actuator.

Fig. 10: Identifying Sliding Door Lock Actuator 6P Connector
Courtesy of KIA MOTORS AMERICA, INC.

3. Check for continuity between the terminals in each switch position. See Fig. 11.

Fig. 11: Testing Sliding Door Lock Actuator
Courtesy of KIA MOTORS AMERICA, INC.

TAILGATE LOCK SWITCH

1. Remove the tailgate trim panel. Refer to TAILGATE .

2. Disconnect the 6P connector from the actuator.

2008 Kia Sedona EX

2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona

Microsoft

Monday, May 24, 2010 4:17:42 PM

Page 6

© 2006 Mitchell Repair Information Company, LLC.

Fig. 12: Identifying Tailgate Lock Actuator 6P Connector
Courtesy of KIA MOTORS AMERICA, INC.

3. Check for continuity between the terminals in each switch position. See Fig. 13.

Fig. 13: Testing Tailgate Lock Actuator
Courtesy of KIA MOTORS AMERICA, INC.

DOOR SWITCH

Remove the door switch and check for continuity between the terminals.

2008 Kia Sedona EX

2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona

Microsoft

Monday, May 24, 2010 4:17:42 PM

Page 7

© 2006 Mitchell Repair Information Company, LLC.

Fig. 14: Identifying Door Switch Connector Terminals
Courtesy of KIA MOTORS AMERICA, INC.

Fig. 15: Testing Door Switch
Courtesy of KIA MOTORS AMERICA, INC.

HOOD SWITCH

1. Disconnect the connector from the hood switch.

2008 Kia Sedona EX

2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona

Microsoft

Monday, May 24, 2010 4:17:42 PM

Page 8

© 2006 Mitchell Repair Information Company, LLC.

Fig. 16: Identifying Hood Switch Connector Terminals
Courtesy of KIA MOTORS AMERICA, INC.

2. Check for continuity between the terminals and ground. See Fig. 17.

Fig. 17: Testing Hood Switch
Courtesy of KIA MOTORS AMERICA, INC.

DOOR WARNING SWITCH

1. Remove driver's crash pad lower panel. Refer to CRASH PAD .

2. Disconnect the 6P connector from the door warning switch.

Fig. 18: Identifying Door Warning Switch 6P Connector
Courtesy of KIA MOTORS AMERICA, INC.

3. Check for continuity between the terminals in each position. See Fig. 19.

2008 Kia Sedona EX

2008 ACCESSORIES & BODY, CAB Keyless Entry & Burglar Alarm - Sedona

Microsoft

Monday, May 24, 2010 4:17:42 PM

Page 9

© 2006 Mitchell Repair Information Company, LLC.