Kia Sedona (2008 year). Instruction — part 459
Fig. 6: Identifying Front Fog Lamp Aiming Adjusting Gear
Courtesy of KIA MOTORS AMERICA, INC.
HEAD LAMP AND FOG LAMP AIMING POINT
Fig. 7: Identifying Head Lamp And Fog Lamp Aiming Points
Courtesy of KIA MOTORS AMERICA, INC.
HEAD LAMP AND FOG LAMP AIMING POINTS SPECIFICATION
Unit: mm
Vehicle
condition
H1
H2
H3
W1
W2
W3
L
Without driver
28.3
(719.5)
28.5
(724.5)
14.4
(366)
60.0
(1,526)
50.3
(1,278)
52.5
(1,363)
118.1
(3,000)
With driver
28.1
(714.5)
28.3
(719.5)
14.2
(361)
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 5
© 2006 Mitchell Repair Information Company, LLC.
1. Turn the low beam on without the driver aboard.
The cut-off line should be projected in the allowable range (shaded region).
Fig. 8: Identifying Low Beam Aiming Dimensions
Courtesy of KIA MOTORS AMERICA, INC.
2. Turn the front fog lamp on without the driver aboard.
The cut-off line should be projected in the allowable range (shaded region)
Fig. 9: Identifying Front Fog Lamp Aiming Dimensions
Courtesy of KIA MOTORS AMERICA, INC.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 6
© 2006 Mitchell Repair Information Company, LLC.
TURN SIGNAL LAMP
REPLACEMENT
FRONT TURN SIGNAL LAMP
1. Disconnect the negative (-) battery terminal.
2. Remove front lamp assembly.
3. Remove the socket in a counterclockwise direction.
Fig. 10: Identifying Turn Signal Lamp Bulb
Courtesy of KIA MOTORS AMERICA, INC.
4. Replace the bulb (A).
REAR TURN SIGNAL LAMP
1. Disconnect the negative (-) battery terminal.
2. Remove the rear lamp assembly (A) after removing the mounting screw (3 EA) and connector.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 7
© 2006 Mitchell Repair Information Company, LLC.
Fig. 11: Identifying Rear Lamp Assembly And Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the socket in a counterclockwise direction and replace the bulbs.
Fig. 12: Removing Bulb Socket
Courtesy of KIA MOTORS AMERICA, INC.
ROOM LAMP
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Detach the lamp lens from the room lamp with a flat-tip screwdriver (-) then replace the bulb.
Fig. 13: Identifying Holding Clip
Courtesy of KIA MOTORS AMERICA, INC.
3. Pull the bulb down and replace it with a new one.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 8
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст