Kia Sedona (2008 year). Instruction — part 460
4. Installation is the reverse of removal.
OVERHEAD CONSOLE LAMP
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Replace the bulb after removing the lens with a flat-tip screwdriver.
Fig. 14: Identifying Overhead Console Lamp Bulb
Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the bulb and replace it with a new one
DOOR COURTESY LAMP
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Replace the bulb (A) after removing the lens with a flat-tip screwdriver.
NOTE:
Take care that holding clip (A) is not to be damaged.
NOTE:
Take care that holding clip (A) is not to be damaged
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 9
© 2006 Mitchell Repair Information Company, LLC.
Fig. 15: Identifying Front Door Courtesy Bulb
Courtesy of KIA MOTORS AMERICA, INC.
Fig. 16: Identifying Rear Door Courtesy Bulb
Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the bulb and replace it with a new one.
FRONT FOG LAMPS
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the front lamp assembly.
3. Remove connector and socket (A) in a counterclockwise direction.
NOTE:
Take care that holding clip (A) is not to be damaged.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 10
© 2006 Mitchell Repair Information Company, LLC.
Fig. 17: Identifying Front Fog Lamps Connector And Socket
Courtesy of KIA MOTORS AMERICA, INC.
4. Remove the bulb and replace it with a new one.
LICENSE LAMPS
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the license plate lamp cover mounting screw with a flat-tip screwdriver.
Fig. 18: Identifying License Plate Lamp Bulb
Courtesy of KIA MOTORS AMERICA, INC.
3. Pull the bulb (B) down and replace it with a new one.
STOP LAMPS
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 11
© 2006 Mitchell Repair Information Company, LLC.
REPLACEMENT
HIGH MOUNTED STOP LAMP
1. Disconnect the negative (-) battery terminal.
2. Open the tail gate and disconnect the high mounted stop lamp mounting bolts (3 EA). And then remove
the high mounted stop lamp (A).
Fig. 19: Identifying High Mounted Stop Lamp
Courtesy of KIA MOTORS AMERICA, INC.
3. Installation is the reverse of removal.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Lighting System - Sedona
Microsoft
Monday, May 24, 2010 4:08:00 PM
Page 12
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст