Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 495
8I–8
SUN ROOF/CONVERTIBLE TOP
Sunroof Control Unit
Removal
1. Disconnect the battery ground cable.
2. Remove the headlining.
D
Refer to Headlining in Exterior/Interior Trim section.
3. Remove the sunroof control unit (1).
D
Disconnect two connectors.
D
Remove two screws.
665RW013
Installation
To install, follow the removal steps in the reverse order.
Sunroof Motor
Removal
1. Disconnect the battery ground cable.
2. Remove the headlining.
D
Refer to Headlining in Exterior/Interior Trim section.
3. Remove the sunroof motor (1).
D
Disconnect the connector.
D
Remove three nuts and two screws.
665RW014
Installation
To install, follow the removal steps in the reverse order.
SUN ROOF/CONVERTIBLE TOP
8I–9
Main Data and Specifications
Torque Specification
Application
N·m
lb ft
lb in
Sunroof Glass Fixing Screws
4
—
35
Sunroof Frame Fixing Bolts and Nuts
8
—
69
EXTERIOR/INTERIOR TRIM
8J–1
AXIOM
BODY AND ACCESSORIES
EXTERIOR / INTERIOR TRIM
CONTENTS
Service Precaution
8J–2
. . . . . . . . . . . . . . . . . . . . . .
Consoles
8J–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Consoles and Associated Parts
8J–3
. . . . . . . . .
Removal
8J–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Door Trim Panel
8J–4
. . . . . . . . . . . . . . . . . . .
Front Door Trim Panel and Associated
Parts
8J–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
8J–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Door Trim Panel
8J–6
. . . . . . . . . . . . . . . . . . . .
Rear Door Trim Panel and Associated
Parts
8J–6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
8J–7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–7
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Door Mirror Assembly
8J–8
. . . . . . . . . . . . . . . . . . . .
Removal
8J–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interior Mirror Assembly
8J–8
. . . . . . . . . . . . . . . . . .
Removal
8J–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Interior Trim Panels
8J–9
. . . . . . . . . . . . . . . . . . . . . .
Interior Trim Panels and Associated Parts
8J–9
Removal
8J–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–11
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Headlining
8J–12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location
8J–12
. . . . . . . . . . . . . . . . . . . . . . . .
Removal
8J–12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–13
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overhead Console
8J–14
. . . . . . . . . . . . . . . . . . . . . .
Parts Location (W/O Sunroof)
8J–14
. . . . . . . . . . .
Removal
8J–14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–14
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location (W/ Sunroof)
8J–15
. . . . . . . . . . . . .
Removal
8J–15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–15
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel Arch Cover
8J–16
. . . . . . . . . . . . . . . . . . . . . . .
Wheel Arch Cover and Associated Parts
8J–16
. .
Removal
8J–16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–16
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locker Cover
8J–17
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Locker Cover and Associated Parts
8J–17
. . . . . .
Removal
8J–17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–17
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Filler Door
8J–18
. . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location
8J–18
. . . . . . . . . . . . . . . . . . . . . . . .
Removal
8J–18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–18
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roof Moulding
8J–19
. . . . . . . . . . . . . . . . . . . . . . . . . .
Parts Location
8J–19
. . . . . . . . . . . . . . . . . . . . . . . .
Removal
8J–19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8J–19
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Door Mirror System
8J–20
. . . . . . . . . . . . . . .
General Description
8J–20
. . . . . . . . . . . . . . . . . . . . .
Door Mirror Switch
8J–20
. . . . . . . . . . . . . . . . . . . . .
Power Window System
8J–21
. . . . . . . . . . . . . . . . . .
General Description
8J–21
. . . . . . . . . . . . . . . . . . . . .
Power Window Switch Driver Seat Side
8J–21
. .
Power Window Motor
8J–22
. . . . . . . . . . . . . . . . . .
Main Data and Specifications
8J–23
. . . . . . . . . . . . .
8J–2
EXTERIOR/INTERIOR TRIM
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст