Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Service manual — part 972
WIPER/WASHER SYSTEM
8B–9
Alarm & Relay Control Unit
Removal
1. Disconnect the battery ground cable.
2. Remove the glove box.
3. Remove the instrument panel passenger lower cover
assembly.
4. Remove the passenger Knee bolster reinforcement
assembly.
5. Remove the fixing bolts, disconnect the connectors
and then remove the alarm & relay control unit (1).
826RW020
Installation
To install, follow the removal steps in the reverse order.
Rear Washer Motor
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim pad(2).
3. Remove two screws, disconnect the connector,
remove the washer hose and then remove the rear
washer tank(3).
4. Pull out the rear washer motor(1) from the washer
tank.
885RS009
Installation
To install, follow the removal steps in the reverse order.
8B–10 WIPER/WASHER SYSTEM
Rear Wiper Arm/Blade
Removal
1. Remove the arm nut(2).
2. Remove the wiper arm/blade(1).
885RS008
Installation
Refer to the installation steps of the Rear Wiper Motor in
Wiper/Washer System section.
Rear Washer Nozzle
Removal
1. Disconnect the hose(3).
2. Remove the lock nut(2), and then remove the washer
nozzle(1).
885RS005
Installation
To install, follow the removal steps in the reverse order.
Rear Washer Nozzle Angle
Adjustment
Loosen the lock nut(2) of the washer nozzle(1) to adjust
the injection angle of the cleaning fluid, and then retighten
the lock nut(2).
885RS004
WIPER/WASHER SYSTEM
8B–11
Rear Washer Spray Pattern
885RS003
Legend
(1) Washer Nozzle
(2) Spray Target
Rear Wiper Blade Rubber
Removal and Installation
Refer to the Windshield Wiper Blade Rubber in this
section.
Main Data and Specifications
Torque Specifications
Application
N·m
Lb Ft
Lb In
Windshield Wiper Motor Shaft Nut
14
—
122
Windshield Wiper Arm Nuts
31
23
—
Rear Wiper Motor Shaft Nut
6
—
52
Rear Wiper Arm Nut
9
—
78
ENTERTAINMENT
8C–1
TROOPER
BODY AND ACCESSORIES
ENTERTAINMENT
CONTENTS
Service Precaution
8C–1
. . . . . . . . . . . . . . . . . . . . . .
Cigarette Lighter
8C–2
. . . . . . . . . . . . . . . . . . . . . . . .
General Description
8C–2
. . . . . . . . . . . . . . . . . . . . .
Removal
8C–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital Clock and Outside Temp
8C–3
. . . . . . . . . . .
Removal
8C–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front ACC Socket
8C–4
. . . . . . . . . . . . . . . . . . . . . . .
Removal
8C–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear ACC Socket
8C–4
. . . . . . . . . . . . . . . . . . . . . . .
Removal
8C–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rod Type Antenna
8C–5
. . . . . . . . . . . . . . . . . . . . . .
Removal
8C–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diversity Glass Antenna
8C–6
. . . . . . . . . . . . . . . . . .
Glass Antenna System Parts Location
8C–6
. . . .
Glass Antenna Pattern
8C–7
. . . . . . . . . . . . . . . . . . .
Glass Antenna Amplifier Removal
8C–7
. . . . . . .
Glass Antenna Amplifier Installation
8C–7
. . . . . .
Radio
8C–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
8C–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Speaker
8C–9
. . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
8C–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tweeter Assembly
8C–9
. . . . . . . . . . . . . . . . . . . . . . .
Removal
8C–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Speaker
8C–10
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
8C–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
8C–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст