Isuzu N-Series. Service manual — part 92
2-74 CAB AND FRAME
Rear Seat Belt Buckle and Rear Center Seat Belt/Buckle (Narrow Cab Model)
Component
Removal
1. Fold the rear seat cushion.
• Pull out each seat belt buckle and seat belt
from the interval of the seat cushion and re-
lease the lock lever of rear seat cushion stay to
fold it.
2. Fixing bolt of each seat belt
Installation
For installation, reverse the removal procedure taking
the following points into consideration.
1. Apply the sealant (1) around the fixing bolt mount-
ing hole on the floor part (2).
Sealant: TOKIWA CHEMICAL INDUSTRY 770GA
or equivalent
2. Install the anchor parallel to the traveling direction
of vehicle.
3. Tighten the fixing bolts to the specified torque.
Legend
1. Rear seat belt buckle (RH)
4. Rear seat belt buckle (LH)
2. Rear center seat belt
5. Rear seat cushion
3. Rear center belt buckle
N2A0233E
N2A0123E
CAB AND FRAME 2-75
Tighten:
Fixing bolts to 44 N
⋅m (4.5 kg⋅m/32.5 lb⋅ft)
Caution:
Install the anchor bracket (2) so that it may not run on
the anchor detent bead (1).
Fixing Torque
N2A0124E
44 (4.5 / 32.5)
N.m (kg.m / lb.ft)
N2A0234E
2-76 CAB AND FRAME
Rear Seat Belt Buckle and Rear Center Seat Belt/Buckle (Wide Cab Model)
Component
Removal
Refer to “Rear Seat Belt Buckle and Rear Center Seat
Belt/Buckle (Narrow Cab Model)” in this section for re-
moval.
Installation
Refer to “Rear Seat Belt Buckle and Rear Center Seat
Belt/Buckle (Narrow Cab Model)” in this section for in-
stallation.
Legend
1. Rear seat belt buckle (RH)
5. Rear center seat belt buckle (LH)
2. Rear center seat belt (RH)
6. Rear seat belt buckle (LH)
3. Rear center seat belt buckle (RH)
7. Rear seat cushion
4. Rear center seat belt (LH)
N2A0235E
CAB AND FRAME 2-77
Fixing Torque
N2A0236E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст