Isuzu N-Series. Service manual — part 55
1A-14 HEATING AND VENTILATION
Blower Motor
Legend
1. Under cover
6. Fan
2. Washer tank
7. Blower motor
3. Washer tank bracket
8. Harness connection connector
4. Blower motor assembly
9. Blower motor connector
5. Clip
N1A0031E
HEATING AND VENTILATION 1A-15
Removal
Preparation:
Disconnect the battery ground cable.
1. Under Cover
While pulling the under cover (1) with care, remove
the clips (2) on the back side of the cover.
2. Washer Tank
Remove the washer tank fixing three bolts (Upper:
two, Lower: one) and disconnect the connector.
3. Washer Tank Bracket
Disconnect the harness connection connector and
remove the fixing bolts.
4. Blower Motor Assembly
Disconnect the motor connector.
5. Clip
6. Fan
7. Blower Motor
Installation
To install, follow the removal steps in the reverse order.
N1A0026E
1A-16 HEATING AND VENTILATION
Blower Filter
Removal
1. Glove Box
Open the glove box and remove the fixing screws.
2. Blower Filter
Pull out the blower filter from the blower upper slit.
Installation
To install, follow the removal steps in the reverse order.
Legend
1. Glove box
3. Slit
2. Blower filter
N1A0033E
HEATING AND VENTILATION 1A-17
Ventilation Grille
Legend
[Driver Side]
[Passenger Side]
1. Meter cluster
1. Instrument panel assembly
2. Ventilation grille
2. Ventilation duct
3. Ventilation grille
N1A0034E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст