Isuzu Trooper (1998-2002 year). Service manual — part 1055
8H–6
SECURITY AND LOCKS
2. For the anti-theft system, be sure to install the push
rod(3) of key switch while pressing it to the door lock
cylinder(5) so that there is no continuity between the
key switch(4) side connector terminal No. D6–2 and
D6–4 (No. D16–2 and D16–4: passenger side).
632RS010
3. Tighten the outside handle and key switch fixing bolts
to the specified torque.
Torque: 9 N·m (0.9kg·m/78 lb in)
4. Check for smooth outside handle and lock cylinder
operation.
SECURITY AND LOCKS
8H–7
Rear Door Lock Assembly
Rear Door Lock Assembly and Associated Parts
652RW004
Legend
(1) Door Trim Panel
(2) Waterproof Sheet
(3) Door Lock Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel.
3. Remove the waterproof sheet.
D
Refer to the Rear Window Regulator And Glass in
Body Structure section.
8H–8
SECURITY AND LOCKS
4. Disconnect the locking links (arrow marks positions)
and remove the fixing screws to remove the door lock
assembly.
652RS002
Legend
(1) Outside Handle
(2) To Inside Lock Knob
(3) To Inside Handle
(4) To Actuator
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the lock assembly and striker
moving surface.
2. Tighten the door lock assembly fixing screws to the
specified torque.
Torque: 7 N·m (0.7kg·m/61 lb in)
3. Check that the door lock operates smoothly.
SECURITY AND LOCKS
8H–9
Rear Outside Handle
Rear Outside Handle and Associated Parts
652RW003
Legend
(1) Door Trim Panel
(2) Waterproof Sheet
(3) Outside Handle
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel.
3. Remove the waterproof sheet.
D
Refer to the Rear Window Regulator And Glass in
Body Structure section.
4. Disconnect the locking link (arrow mark position) and
remove three fixing bolts to remove the outside
handle.
652RS003
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст