Mercedes-Benz ML320. Service manual — part 376
163 589 00 91 00
Extraction hose
Adapter hose
Pliers
163 589 00 37 00
168 589 00 90 00
Commercially available tools (see Workshop Equipment Manual)
Number
Designation
Make (e.g.)
Order number
WH58.30-Z-1001-16A
Suction master M2P 20 B
Ecco GmbH
Vonkeln 17
D-42349 Wuppertal
9749 5000 50
Copyright DaimlerChrysler AG 28.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 3
AR40.10-P-1080A
Draining TIREFIT sealant out of tires
18.6.96
MODEL
163.174
MODEL
168, 170, 171, 203, 209, 211, 230, 240
P40.10-0309-02
1
Tire sealant container
2
Hose
3
Tire sealant
Draining
Danger!
Risk of death cased by vehicle slipping or
toppling off of the lifting platform.
Align vehicle between the columns of the
hydraulic hoist and position the four support
plates below the hoist support points specified
by the vehicle manufacturer.
AS00.00-Z-0010-01A
1
Remove wheel.
e
Remove/install wheels, rotate if necessary
Model 163.174
AP40.10-P-4050GH
Model 168, 170, 203, 209, 211, 230, 240
AP40.10-P-4050Z
Type 171
AP40.10-P-4050V
2
Position road wheel upright with valve
pointing downwards for
approx. 10 minutes.
Raise wheel approx. 200 mm to allow tire
sealant (3) to run out.
3
Unscrew valve element from the valve and
allow pressure to escape from the tire
4
Pull valve out of rim.
Press remains of valve remaining in valve
bore of disk wheel into inside of tire.
5
Attach hose (2) to tire sealant container (1).
Replace original hose of tire sealant
container (1) with a hose (2) approx.
400 mm long.
6
Press tire sealant container (1) together and
immerse hose (2) through the valve hole in
the disk wheel, as low as possible into the tire
repair kit (3)
7
Reduce pressure on tire sealant container (1),
the tire sealant (3) is extracted.
This method can be used to remove
approx. 90% of the tire sealant (3).
If the tire sealant container (1) is not
available, drill the tire tread with a twist drill (
4
10mm) and allow the tire repair kit (3) to flow
into a suitable container.
TIREFIT tire sealant
Model 163.174, 168, 170, 171, 203, 209, 211,
230, 240
AH40.10-P-0001-01A
8
Replace tire
Remove the remaining tire repair kit (3)
from the rim using a damp cloth.
AR40.10-P-1030A
9
Place new TIREFIT tire repair kit in the vehicle See
#
e
TIREFIT tire sealant - check expiration date.
AP40.10-P-4054R
Copyright DaimlerChrysler AG 06.07.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
AR54.21-P-1300GH
Remove/install drive authorization module (FBM)
11.7.00
MODEL
163.136 /154 /172 #A as of 145273,
163.136 /154 /172 #X as of 708319,
163.113 /128 /157 /174 /175
P54.21-2099-06
2
Extended-Activity-Module (EAM)
3
Retaining lugs
4
Removal tools
5
DAS control module
Remove/install
1
Remove Extended-Activity-Module (EAM) (2)
AR54.21-P-1200GH
2
Loosen the retaining lugs (3) which hold the
DAS control module (5) in the EAM
Ensure that the retaining lugs do not
break off.
Use radio removal tools (4) for removal.
3
Remove the DAS control module from the EAM
Before installing a new DAS control
module, determine in the old DAS control
module whether keys are banned and code
suitably in the new DAS control module.
Note: The chassis number must be
stated when ordering a new control module.
4
Install in the reverse order
5
Move ignition key into position 1 for at least
40 seconds
6
Check whether the vehicle can be started
with all keys
Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
GF54.21-P-4106GH
Extended activity module position/task
23.6.99
MODEL
163
P54.21-2057-11
N10/1 Extended activitiy module
The extended activity module in combination with the new drive
authorization system (DAS (N10/ 1- n1)) represents an extension of
the All-Activity Module. In addition, the extended activity module acts
as a diagnosis gateway for the transfer case, the all-activity module
and as of 1.9.00 for the trip computer control module.
Extended activity module position
The extended activity module is located in the
interior of the vehicle on the left side behind
the instrument cluster.
Extended activity module task
GF54.21-P-4106-01GH
Copyright DaimlerChrysler AG 18.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorded by Modification services.
Page 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст