Opel Adam (2019 year). Instruction — part 7
Lighting
103
Turn lights
stalk up
: right turn light
stalk down : left turn light
A resistance point can be felt when
moving the stalk.
Constant flashing is activated when
the stalk is being moved beyond the
resistance point. It is deactivated
when the steering wheel is moved in
the opposite direction or stalk is
instructionly moved back to its neutral
position.
Activate temporary flashing by
holding the stalk just before the
resistance point. Turn lights will flash
until stalk is being released.
To activate three flashes, tap the stalk
briefly without passing the resistance
point.
Rear fog light
Operated by pressing r.
Light switch in position AUTO:
switching on rear fog light will switch
on headlights automatically.
Parking lights
When the vehicle is parked, the
parking lights on one side can be
activated:
1. Switch off ignition.
2. Move the stalk all the way up (right
parking lights) or down (left
parking lights).
Confirmed by a signal and the
corresponding turn light control
indicator.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
104
Lighting
Reversing lights
The reversing light comes on when
the ignition is on and reverse gear is
selected.
Misted light covers
The inside of the light housing may
mist up briefly in poor, wet and cold
weather conditions, in heavy rain or
after washing. The mist disappears
quickly by itself. To help, switch on the
headlights.
Interior lighting
Instrument panel
illumination control
Brightness of the following lights can
be adjusted when the exterior lights
are on:
● instrument panel illumination
● ambient light
● dome light
● Info Display
● illuminated switches and
operation elements
Turn thumb wheel A and hold until
the desired brightness is obtained.
Interior lights
Front courtesy light
During entry and exit of the vehicle,
the courtesy light automatically
switches on then off after a delay.
w
: automatic switching on
and off
press u : on
press v : off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Lighting
105
Note
In the event of an accident with
airbag deployment the courtesy
lights are turned on automatically.
Dome light
Spotlight incorporated in the interior
lighting comes on when headlights
are switched on.
Dome light illuminates gear shifting
console indirectly.
Ambient light
Ambient light consists of indirect
lights in the doors, in the instrument
panel below the heating and
ventilation unit and in the passenger
foot well. Eight colours can be
selected by a button in the roof
console.
Operate button with ignition switched
on:
m
one brief
press
: on or off
S
repeated
brief presses
: colours change in
steps
S
long press
: colours change
continuously
Ambient light can be dimmed with the
thumb wheel A together with the
instrument panel illumination 3 104.
The selected colour remains the next
time the ignition is switched on.
Ambient light comes on automatically
when switching off ignition and
extinguishes after opening a door.
Pressing m after switching off ignition;
ambient light remains on for
60 minutes.
Starlight panel
Starlight panel consists of approx.
64 LEDs. The intensity can be
dimmed with a button in the roof
console.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
106
Lighting
Operate button with ignition switched
on:
m
one brief
press
: on or off
T
repeated
brief presses
: dimming
stepwise
T
long press
: dimming
continuously
The selected intensity remains the
next time the ignition is switched on.
Starlight comes on automatically
when switching off ignition and
extinguishes after opening a door.
Pressing m after switching off ignition;
starlight remains on for 60 minutes.
Lighting features
Entry lighting
Welcome lighting
The following lights are switched on
for a short time by unlocking the
vehicle with the radio remote control:
● headlights
● tail lights
● number plate lights
● instrument panel light
● interior lights
Some functions are only operable
when it is dark outside to facilitate
locating the vehicle.
The lighting switches off immediately
when the ignition key is turned to
position 1 3 118.
Activation or deactivation of this
function can be changed in the
Info Display.
Vehicle personalisation 3 92.
The settings can be saved for the key
The following lights will additionally
switch on when the driver's door is
opened:
● illumination of some switches
● Driver Information Centre
● ambient light
● starlight panel
Exit lighting
The following lights switch on if the
key is removed from the ignition
switch:
● interior lights
● instrument panel light (only when
it is dark)
● ambient light
● starlight panel
They will switch off automatically after
a delay and will be activated again if
the driver's door is opened.
Path lighting
Headlights, tail lights and number
plate lights illuminate the surrounding
area for an adjustable time after
leaving the vehicle.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Lighting
107
Activating
1. Switch off the ignition.
2. Remove the ignition key.
3. Open the driver's door.
4. Pull the stalk.
5. Close the driver's door.
If the driver's door is not closed the
lights switch off after 2 minutes.
Exit lighting is switched off
immediately if the stalk is pulled while
the driver's door is open.
Activation, deactivation and duration
of this function can be changed in the
Info Display.
Vehicle personalisation 3 92.
The settings can be saved for the key
Battery discharge protection
Vehicle battery state of charge
function
The function guarantees longest
vehicle battery life via a generator
with controllable power output and
optimised power distribution.
To prevent discharge of the vehicle
battery when driving, following
systems are reduced automatically in
two stages and finally switched off:
● auxiliary heater
● heated rear window
● heated mirrors
● heated seats
● fan
In the second stage a message which
confirms the activation of the vehicle
battery discharge protection will be
displayed in the Driver Information
Centre.
Switching off electric lights
To prevent discharge of the vehicle
battery when the ignition is switched
off, some interior lights are switched
off automatically after some time.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
108
Climate control
Climate control
Climate control systems . . . . 108
Heating and ventilation system 108
Air conditioning system . . ... 109
Electronic climate control
system . . . . . . . . . 111
Air vents . . . . . . . . . . 115
Adjustable air vents . . . . . 115
Fixed air vents . . . . . . . 116
Maintenance . . . . . . . .. 116
Air intake . . . . . . . . . 116
Air conditioning regular
operation . . . . . . . . 116
Service . . . . . . . . . 116
Climate control systems
Heating and ventilation
system
Controls for:
● temperature
● fan speed
● air distribution
Heated rear window Ü 3 31.
Heated seats ß 3 37.
Heated steering wheel * 3 63.
Temperature
red : warm
blue : cold
Heating will not be fully effective until
the engine has reached normal
operating temperature.
Fan speed
Adjust the air flow by switching the fan
to the desired speed.
Air distribution
M
: to head area
L
: to head area and foot well
K
: to foot well and windscreen
J
: to windscreen, front door
windows and foot well
l
: to windscreen and front door
windows
Intermediate settings are possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Climate control
109
Demisting and defrosting the
windows
● Set temperature control to
warmest level.
● Set fan speed to highest speed.
● Set air distribution control to l.
● Switch on heated rear window Ü.
● Open side air vents as required
and direct them towards door
windows.
● For simultaneous warming of the
foot well, set air distribution
control to J.
Air conditioning system
Controls for:
● temperature
● fan speed
● air distribution
n
: cooling
4
: air recirculation
Ü
: heated rear window 3 31
Heated seats ß 3 37.
Heated steering wheel * 3 63.
Temperature
red : warm
blue : cold
Heating will not be fully effective until
the engine has reached normal
operating temperature.
Fan speed
Adjust the air flow by switching the fan
to the desired speed.
Air distribution
M
: to head area
L
: to head area and foot well
K
: to foot well and windscreen
J
: to windscreen, front door
windows and foot well
l
: to windscreen and front door
windows (air conditioning is
activated in the background to
help preventing windows from
fogging)
Intermediate settings are possible.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
110
Climate control
Cooling n
Press n to switch on cooling. The
LED in the button illuminates to
indicate activation. Cooling is only
functional when the engine is running
and climate control fan is switched on.
Press n again to switch off cooling.
The air conditioning system cools and
dehumidifies (dries) as soon as the
outside temperature is slightly above
the freezing point. Therefore
condensation may form and drip from
under the vehicle.
If no cooling or drying is required,
switch off the cooling system for fuel
saving reasons.
Activated cooling may inhibit
Autostops.
Stop-start system 3 120.
Air recirculation system 4
Press 4 to activate air recirculation
mode. The LED in the button
illuminates to indicate activation.
Press 4 again to deactivate
recirculation mode.
9 Warning
The exchange of fresh air is
reduced in air recirculation mode.
In operation without cooling the air
humidity increases, so the
windows may mist up from inside.
The quality of the passenger
compartment air deteriorates,
which may cause the vehicle
occupants to feel drowsy.
In warm and very humid ambient air
conditions, the windscreen may mist
up from outside, when cold air is
directed to it. If windscreen mists up
from outside, activate windscreen
wiper and deactivate l.
Maximum cooling
Briefly open the windows so that hot
air can disperse quickly.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Climate control
111
● Switch on cooling n.
● Air recirculation system 4 on.
● Set temperature control to
coldest level.
● Set fan speed to highest level.
● Set air distribution control to M.
● Open all vents.
Demisting and defrosting the
windows l
● Set temperature control to
warmest level.
● Set fan speed to highest level.
● Set air distribution control to l.
● Switch on heated rear window Ü.
● Open side air vents as required
and direct them towards the door
windows.
Note
If air distribution mode l is selected
while engine is running, an Autostop
will be inhibited until another air
distribution is selected.
If air distribution mode l is selected
while the engine is in an Autostop,
the engine will restart automatically.
Electronic climate control
system
Controls for:
● fan speed
● temperature
● air distribution
n
: cooling
AUTO : automatic mode
4
: instruction air recirculation
-------------------------------------------------------------------------------------------------------------------------------------------------------------
112
Climate control
V
: demisting and defrosting
Ü
: heated rear window 3 31
Heated seats ß 3 37.
Heated steering wheel * 3 63.
In automatic mode temperature, fan
speed and air distribution are
regulated automatically.
Climate control settings are shown on
the Info Display. Setting modifications
are briefly popped-up, superimposed
over the currently displayed menu.
The electronic climate control system
is only fully operational when the
engine is running.
Automatic mode AUTO
Basic setting for maximum comfort:
● Press AUTO, the air distribution
and fan speed are regulated
automatically. The LED in the
button illuminates to indicate
activation.
● Open all air vents to allow
optimised air distribution in
automatic mode.
● Press n to switch on optimal
cooling and demisting. The LED
in the button illuminates to
indicate activation.
● Set the preselected temperature
using the centre rotary knob.
Recommended temperature is
22 °C.
Temperature preselection
Set temperature by turning the centre
rotary knob to the desired value. It is
indicated in the display of the switch.
For reasons of comfort, change
temperature only in small increments.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Climate control
113
If the minimum temperature Lo is set,
the climate control system runs at
maximum cooling, if cooling n is
switched on.
If the maximum temperature Hi is set,
the climate control system runs at
maximum heating.
Note
If n is switched on, reducing the set
cabin temperature can cause the
engine to restart from an Autostop or
inhibit an Autostop.
Stop-start system 3 120.
Demisting and defrosting the
windows V
● Press V. The LED in the button
illuminates to indicate activation.
● Temperature and air distribution
are set automatically and the fan
runs at high speed.
● Switch on heated rear window Ü.
● To return to previous mode:
press V, to return to automatic
mode: press AUTO.
Setting of automatic rear window
heating can be changed in the Info
Display.
Vehicle personalisation 3 92.
Note
If V is pressed while the engine is
running, an Autostop will be inhibited
until V is pressed again.
If s is pressed with the fan switched
on and the engine running, an
Autostop will be inhibited until s is
pressed again or until the fan is
switched off.
If V is pressed while the engine is
in an Autostop, the engine will restart
automatically.
If s is pressed with the fan switched
on while the engine is in an
Autostop, the engine will restart
automatically.
Instruction settings
Climate control system settings can
be changed by activating the buttons
and rotary knobs as follows.
Changing a setting will deactivate the
automatic mode.
Fan speed Z
-------------------------------------------------------------------------------------------------------------------------------------------------------------
114
Climate control
Turn left rotary knob to decrease or
increase fan speed. The fan speed is
indicated in the Info Display.
Turning knob to $: fan and cooling
are switched off.
To return to automatic mode: Press
AUTO.
Air distribution
Turn right rotary knob for desired
adjustment. Setting is indicated in the
Info Display.
K
: to foot well and windscreen
9
: to windscreen, front door
windows and foot well
s
: to windscreen and front door
windows (air conditioning is
activated in the background to
help preventing windows from
fogging)
M
: to head area via adjustable air
vents
L
: to head area and foot well
Return to automatic air distribution:
press AUTO.
Cooling n
Press n to switch on cooling. The
LED in the button illuminates to
indicate activation. Cooling is only
functional when the engine is running
and climate control fan is switched on.
Press n again to switch off cooling.
The air conditioning system cools and
dehumidifies (dries) as soon as the
outside temperature is slightly above
the freezing point. Therefore
condensation may form and drip from
under the vehicle.
If no cooling or drying is required,
switch off the cooling system for fuel
saving reasons.
When the cooling system is switched
off, no engine restart will be
requested by the climate control
system during an Autostop.
Exception: defrost system is activated
and outside temperature above 0 °C
requests a restart.
Stop-start system 3 120.
The status of cooling operation is
indicated in the Info Display.
Activation or deactivation of cooling
operation after engine start can be
changed in the Info Display.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Climate control
115
Air recirculation mode 4
Press 4 to activate air recirculation
mode. The LED in the button
illuminates to indicate activation.
Press 4 again to deactivate
recirculation mode.
9 Warning
The exchange of fresh air is
reduced in air recirculation mode.
In operation without cooling the air
humidity increases, so the
windows may mist up from inside.
The quality of the passenger
compartment air deteriorates,
which may cause the vehicle
occupants to feel drowsy.
In warm and very humid ambient air
conditions, the windscreen may mist
up from outside, when cold air is
directed to it. If windscreen mists up
from outside, activate windscreen
wiper and deactivate s.
Basic settings
Some settings can be changed in the
Info Display.
Vehicle personalisation 3 92.
Air vents
Adjustable air vents
At least one air vent must be open
while the cooling is on.
Adjust the air amount at the vent
outlet by turning the adjuster wheel.
The vent is closed when the adjuster
wheel is turned close to the left or
right.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
116
Climate control
Direct the flow of air by tilting and
swivelling the slats.
9 Warning
Do not attach any objects to the
slats of the air vents. Risk of
damage and injury in case of an
accident.
Fixed air vents
Additional air vents are located
beneath the windscreen and door
windows and in the foot wells.
Maintenance
Air intake
The air intake in front of the
windscreen in the engine
compartment must be kept clear to
allow air intake. Remove any leaves,
dirt or snow.
Air conditioning regular
operation
In order to ensure continuously
efficient performance, cooling must
be operated for a few minutes once a
month, irrespective of the weather
and time of year. Operation with
cooling is not possible when the
outside temperature is too low.
Service
For optimal cooling performance, it is
recommended to annually check the
climate control system, starting
three years after initial vehicle
registration, including:
● functionality and pressure test
● heating functionality
● leakage check
● check of drive belts
● cleaning of condenser and
evaporator drainage
● performance check
Note
Refrigerant R-134a contains
fluorinated greenhouse gases.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Driving and operating
117
Driving and
operating
Driving hints . . . . . . . ... 117
Control of the vehicle . . . ... 117
Steering . . . . . . . . ... 118
Starting and operating . . . ... 118
New vehicle running-in . . . 118
Ignition switch positions . . ... 118
Retained power off . . . . .. 119
Starting the engine . . . . .. 119
Overrun cut-off . . . . . . 120
Stop-start system . . . . . 120
Parking . . . . . . . . . 122
Engine exhaust . . . . . . .. 123
Exhaust filter . . . . . . . 123
Catalytic converter . . . . ... 124
Manual transmission . . . . .. 125
Brakes . . . . . . . . . . 125
Antilock brake system . . . . 125
Parking brake . . . . . . .. 126
Brake assist . . . . . . . . 127
Hill start assist . . . . . . . 127
Ride control systems . . . . . 127
Traction Control system . . .. 127
Electronic Stability Control . .. 128
City mode . . . . . . . . 130
Driver assistance systems . . . 131
Cruise control . . . . . . .. 131
Speed limiter . . . . . . ... 133
Parking assist . . . . . . .. 134
Side blind spot alert . . . . . 143
Fuel . . . . . . . . . . . 145
Fuel for petrol engines . . . . 145
Fuel for liquid gas operation . 146
Refuelling . . . . . . . . 146
Driving hints
Control of the vehicle
Never coast with engine not
running
Many systems will not function in this
situation (e.g. brake servo unit, power
steering). Driving in this manner is a
danger to yourself and others.
All systems function during an
Autostop.
Stop-start system 3 120.
Idle boost
If charging of the vehicle battery is
required due to battery condition, the
power output of the generator must
be increased. This will be achieved by
an idle boost which may be audible.
A message appears on the Uplevel
Display.
Pedals
To ensure the pedal travel is
uninhibited, there must be no mats in
the area of the pedals.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
118
Driving and operating
Use only floor mats, which fit properly
and are fixed by the retainers on the
driver side.
Steering
If power steering assist is lost
because the engine stops or due to a
system malfunction, the vehicle can
be steered but may require increased
effort.
Control indicator c 3 79.
Starting and operating
New vehicle running-in
Do not brake unnecessarily hard for
the first few journeys.
During the first drive, smoke may
occur because of wax and oil
evaporating off the exhaust system.
Park the vehicle in the open for a
while after the first drive and avoid
inhaling the fumes.
During the running-in period, fuel and
engine oil consumption may be
higher.
Additionally, the cleaning process of
the exhaust filter may take place more
often.
Exhaust filter 3 123.
Autostop may be inhibited to allow for
charging of the vehicle battery.
Ignition switch positions
0 : ignition off: Some functions
remain active until key is
removed or driver's door is
opened, provided the ignition was
on previously.
1 : accessory power mode: Steering
wheel lock released, some
electrical functions are operable,
ignition is off.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст